Clutch head drivers.

Hey guys, were can I find some cluch head bits that won't cost and arm and a leg? The kind with the socket base to use on a ratchet. I have a couple of the screwdriver type, but they tend to be a bit impractical.
Thanks

 

I bought a set of bits at an Ace Hardware it contained about 150 bits including clutch head, came with an adapter for 1/4 inch ratchet

 

When I needed some I was looking all over & found mine at Chevs Of The 40's. They are 1/4" drive; #3685598 1/8" $4.00 & #3685592 5/32" $4.00 & #3685594 3/16" $4.00 & #3685593 1/4" $4.00 & #3685595 5/16" $6.00 & a clutch head bit holder #3685596 $6.00 OR you can get a clutch head driver w/5 bits for $19.00!(which is what I bought) Call 1-800-999-2438 Gary 4T950 Chevy Guy

 

Snap-On has them and they're not priced to bad. About $10 a piece I think. They're so much better than the other ones I've had...

 

A little RTV, a few cheapo swap meet or pawn store 1/4" sockets, and you can mount all your screwdriver bits in 1/4 drive.

And Snap On (and probably others) will happily sell you a 1/4" drive extension end with a screwdriver handle on it.

-bill

 

I don't know, I still use the clutch screwdrivers my dad bought in the 60s

 

my uncle has a nice set of clutch head screw drivers he got from NAPA a looong time ago.

 

Check out your local RV center. They use them in motorhomes ,travel trailers,etc

 

$20 -

http://www.deerelydeparted.com/p-314-38-drive-hood-fastener-tool.aspx

 

I just bought the drivers from McMaster-Carr. Cost me lest than $6 for all 5 sizes.