Technical Counting a spline???

Hi, I need some help! I count the raised part of the spline from a th 400 trans, yoke and I count 31 plus a space. And I counted that at least 4 times. I was told it should be 32 raised areas and a space. What is what??? Thanks for any help Miller.

 

who told you that?

 

It sounds like your yoke has a blind spline. Meaning, missing one for some other application for alignment. Pretty sure they are 32.

 

speedway shows it as 32 plus a space.

 

Make a centered, straight-on photo and we'll all count how many points.

 

as suggested see attached pics

 

that's a 32 spline yoke for a TH400

 

Looks like 32 to me .
Wouldn’t number 32 fit into the blank spot .

Tommy

 

count the grooves where the splines on the shaft go....and ***ume the splines are all the same and evenly spaced....

 

Isn't it supposed to have an end cap...? I thought the empty spline was to vent the lube, for rear axle travel...?

 

lots of trucks had bolt on yokes, no end cap

but if you're using it as a slip yoke, it might be a tad short, and could leak profusely

 

I counted 47

 

thanks for the replies and yes it was from a truck or mobile home, and it does have a washer and bolt.

 

Just sayin',,, reason for no slip, is 2 piece shaft the slip is at the middle support.

 

I was told there would be no math today!