bought a kit from speedway for my t bucket no e brake. Found out to p*** inspection i need a e brake. speedway dont carry the calipers i need and im having a hard time finding what i need so thought id post see if someone knows what i need. my brackets are for full size d52 type gm caliper for 69-72 Chevelle 73-77 a body 1969-1981 Camaro . my bracket is designed for large gm caliper 7"inch mount width. rear end is a olds Pontiac my bolt pattern is 5 on 5 .thank you
Pre-1979 Cadillac Eldorado. 1973-1978, I think. You will need to source levers, and make the cable brackets.
You're in luck. The actuation hardware is being reproduced. https://www.greatlakeoffroad.com/pr...eldorado-e-brake-caliper-parts-actuating-kit/ You would just need to buy a pair of thin nylock nuts. Lokar stuff hooks right up to these. Easy peasy. Most chain auto parts stores can get the calipers. They take the same pads as the front ones that came in your kit, and they bolt directly into the same brackets.
Those are 75/78 Eldorado. The only one I know of that sells them with the levers new is https://www.ruffstuffspecialties.com/R2262-A.html I need to order a pair for my 71 3/4 ton that I am putting disk on the rear. The off road/crawler brigade running 3/4 ton axles usually run the front calipers like came in your kit but need the park brake to p*** inspection for highway use.
Woah, I just checked AutoZone, any they show them with the lever and return spring! I have only seen them naked.https://www.autozone.com/brakes-and...c163/235622_0_0?searchText=rear brake caliper
called on the AutoZone caliper special-order item and none available napa said no way he can get a set.
my store here in ankney says no but i like your store happen to have a location or where you looked it up