Chevrolet 261s, HARPER, blower, etc. #1 1954 261 short block, casting # 3733950, unusual in that it has no captains bars, block has been modified for full flow oil filter, vatted, honed, new cam bearings, takes the short water pump, bored 1/8 over = 278 cu. in., Jahns pop up pistons, Cliffords 270 cam, crank is 10/10. Very rare Harper 3x2 intake with large logo Stromberg carbs. This is the set-up that has the primary/secondary conversion mods to the carbs and the correct linkage. Also have cyl. head ready to bolt on. $4,000.00 #2 1955-57 261 short block, casting # 3837012, converted for full flow oil filter, bored .060, Venolia dished pistons, vatted, honed, new cam bearings, polished GMC rods with ARP bolts, crank is 20/20, rotating ***embly appears to have been balanced, stock 261 cam and lifters, Intake is very rare Hunter Performance blower intake with a B&M 144 blower, $4,000.00 I am only interested in selling one of the above, either one. Included with either of the above I have some other items such as Fenton iron headers, oil pan, timing cover, lifter cover, oil pump, some bearings, rings, tubular push rods, rocker arms, misc. and an 848 cylinder head ready to bolt on. Not interested in parting out or mixing any of the above combinations. #3 1958 and later 261 short block, this is just a core, will not turnover due to rust in cylinders, it is still ***embled with oil pan, timing cover, bell housing, flywheel, etc. and more. $450.00 make offer Located in central GA, Eddie 478-967-3362
The Jalopy Journal
