Been gathering parts for another Model A build and just have too many irons in the fire, figured someone else might be looking for a traditional build. It is a Model A front axle with split bones, also comes with a 40 axle, bare, no spindles, also a set of loaded backing plates for juice brakes, all old used stuff, and a pair of good hubs. I have a set of split bones for 40 axle with bungs welded in and heim joints. Frame measures up to be about a 125" wheelbase front center of the front perch to the two mounts on the rear kickup. Frame is a Speedway from what I am told, I got it as is. There are two weld on mounts for front bones along with four more shorter mounts. The rear axle is a 35 Ford truck, 3.73 gears, have the new heim joints and weld in bungs, turns nice, has the bones with it, nice shape. The bed has a little rust on the bottom, like most do. Good rat rod bed, tailgate is there and likewise has a touch of rust. I was thinking about a 40ish cab on it, like that look, but my attempts to get one built have not come to fruition... I am including a T Bucket body with the project, you can finish it with that and sell the Model A bed or put together another project. I do also have a 61 Ford complete front axle with springs and another old about 57 Ford axle I could toss in for a little extra. Also have a pair of early 30s Chevy frame rails. Maybe a start to a G***er build? Shop cleanup! Would also consider trading for an LS swap for my 69 C-10. The front hubs, 40 axle and backing plates came off a disc brake upgrade on my roadster. I would trade for something else, parts, transmissions...I could use a couple fresh 350 or 400 turbos, a 700r4, could use another tunnel ram or two. Who knows...just have a dozen projects and need to thin it out a bit.
The Jalopy Journal
