Register now to get rid of these ads!

Projects Flat FED build

Discussion in 'Traditional Hot Rods' started by roseville carl, Jan 14, 2010.

  1. joemac05
    Joined: Jul 29, 2006
    Posts: 491

    joemac05
    Member


    Real nice video Carl, looks like you had a good day, ran well and home in one piece.
    :)
     
  2. any day ya get home in one piece is a great day, thanks Joemac ;)
     
    loudbang likes this.
  3. Well tis that time again,
    'Twas the night before Christmas, and all through the shop

    Not a creature was stirring, all the work just had stopped,


    The tools were all hung on the peg board with care,

    In hopes that Santa soon would be there.


    The cars were all parked safely covered in the garage,

    My Roadster, My Pickup, and even my Hemi Dodge


    My wife in her robe and I in my Batman P.J.'s

    Had just settled down after shopping for days


    When out on the driveway there arose such a clatter!

    It sounded to me just like pressure plate chatter


    On to the driveway I flew like the Flash

    I tripped over the dog and landed in the trash.


    When there in the driveway beneath the Moon and the Stars

    sat a Model A Coupe with chrome ladder bars.


    As I walked up closer to get a better view

    I noticed a Blown Flathead and cheater slicks too.


    There behind the wheel sat a driver so tuff

    With Tattoos, an earring, and beard oh so ruff,


    Dressed in Black leather he looked like a Bruiser

    I knew right away he must be the Flathead Cruiser"


    He said "I pulled second, I pulled third, then I heard a big Bang,

    Things started to smoke, things started to clang!"


    "I spotted your big garage with hopes of repair"

    His back seat was full of presents, but I tried not to stare.


    "If you can fix my Ford and make it shift right

    I will give you these gifts for ruining your night"


    We opened the door and pushed the Ford in

    Before I got underneath, he gave me a wink and a grin.


    The headers were hot, the slicks they were sticky

    That blow-proof bell housing would make the job tricky.


    I turned on my droplight and gave it a look

    The big 3 inch exhaust was making me cook.


    When there to my surprise what did I see?

    The four tranny bolts had wiggled themselves free


    I grabbed my trusty torque wrench and started to turn

    As I tightened the last one I could smell my sleeves burn


    He slid behind the wheel and then fired up that mill.

    As I directed him out, just listening to it idle, it gave me a chill


    A Big Blown Flattie with two 94's up top

    Chrome reverse rims and a 2 inch suspension drop.


    He eased it out to the street and set the line lock

    I knew this would not be quiet, probably wake the whole block,


    He revved it to 6 grand and let the clutch pop

    As the rubber and smoke poured from the tires I spotted a cop!


    He released the line lock and let that Ford loose

    This baby was ALL MOTOR with no signs of Juice!


    He fishtailed sideways, grabbed Third with plenty of guts.

    With Police in full chase he screamed out for all

    "MAKE SURE YOU USE LOCKTITE SO YOU DON'T LOOSEN YOUR NUTS!"
    santa dragster.JPG
     
  4. Well lots of changes this year, Eagle Field is no more, but all is not lost there will be an Eagle Field Reunion race at Mendota Raceway in May and Oct, where the Flathead V8/6Cyl Clash will resume in all its glory, I hope ya all can attend and enjoy the splendor that was Eagle Field. Lets keep it going!!!!! 479483973_1106538857943980_5803580215610740048_n.jpg
     
  5. humm gettin ready for May
     
  6. Bring your Flathead 8's and 6 Cylinders out with us at Mendota on the 17-18th of May and get a shot at this
    20250409_134023.jpg
     
    chryslerfan55 and loudbang like this.
  7. 33 more getups..........
     
    loudbang likes this.
  8. Well another Eagle Field Drags is in da books and congratulations to Greg Silveria in the Flathead V8/6Cyl Clash for taking the trophy IMG_8839.jpg DSC02933 - Copy.JPG
     
  9. AmishMike
    Joined: Mar 27, 2014
    Posts: 1,279

    AmishMike
    Member

    What were your results? How did it run?
     
    chryslerfan55 likes this.
  10. 7.31 at 91 but bad lights all day, old reaction times by old man ug. Car ran good but not so much driver.......oh well there's always October.....But thanks for asking;)
     
  11. AmishMike
    Joined: Mar 27, 2014
    Posts: 1,279

    AmishMike
    Member

    People stare but I have been known to do jumping jacks in the staging lanes, get fired up, get in car, pull up to the lights ready to leave as the green goes. Of coarse some guys dose waiting in stage lanes. Anyway car ok, ready for the next time
     
    chryslerfan55 and loudbang like this.
  12. AmishMike
    Joined: Mar 27, 2014
    Posts: 1,279

    AmishMike
    Member

    Actually had to laugh when looked at video. We all getting older, got to laugh at stupid things we all do. Nothing broke all good
     
  13. ukgav
    Joined: Jun 16, 2008
    Posts: 355

    ukgav
    Member

    It would be one hell of a race if our cars ever lined up. Very similar 1/8th mile speed and e.t.
    IMG_1124.jpg
     
    chryslerfan55 likes this.
  14. yep similar 1/4 times 11.3 117.3, will be changing rear gears to 5.57's to increase my 1/8 times
     
    chryslerfan55 likes this.
  15. More pics from Reunion 25 thanks to Leo Lopez
    499267515_991270006327172_5330832222845942179_n.jpg 499460247_991263749661131_2518950479583002836_n.jpg 499878907_991270869660419_7804511999225553615_n.jpg 499937461_991269576327215_8024713593175009117_n.jpg 499984592_991266706327502_450421912728195090_n.jpg 499985648_991268139660692_3845383918469364255_n.jpg 500108446_991267719660734_4550386886263614034_n.jpg 500111625_991265659660940_2951631133673062772_n.jpg 500657288_991262642994575_5027739442330098810_n.jpg 500685954_995304809257025_5828757858294747591_n.jpg 500739024_991270446327128_4541844785596922477_n.jpg 500986893_995307475923425_2297604973521516807_n.jpg 501143392_995307522590087_3636790697888713725_n.jpg 501245087_995304665923706_9042424814826940664_n.jpg 501358067_995304725923700_7564824184066220067_n.jpg 501596965_995307615923411_7454760524863816018_n.jpg 502462808_995304759257030_2695204973622841159_n.jpg 502511505_995307479256758_8194193665924470541_n.jpg 502606306_995304789257027_6926865486725066513_n.jpg
     
    282doorUK and loudbang like this.
  16. AmishMike
    Joined: Mar 27, 2014
    Posts: 1,279

    AmishMike
    Member

    More info on blue & white midget shape please
     
    THE FRENCHTOWN FLYER likes this.
  17. patsurf
    Joined: Jan 18, 2018
    Posts: 1,920

    patsurf

  18. Yes Dick is Elmer's son and has taken over Elmer's seat after he passed away. I raced Elmer at Eagle Field until he passed, we raced when he was 90 and now that has become my goal in life. And yes that is Elmer's original old car before the chevy that Dick resurrected for Elmer and is still running it at Eagle Field Reunions come see us all in May and October at Mendota Raceway.......
     
    loudbang likes this.
  19. Amish Mike the car is Tracy Ledford's built after the "Cotton Dropper" by Tracy. 46 Ford 284 Ci 39 Ford box, 41 rear, a really nicely done car all period correct.
     
    loudbang and AmishMike like this.
  20. patsurf
    Joined: Jan 18, 2018
    Posts: 1,920

    patsurf

    thanks much! think i might have seen it at cotati when i was little
     
  21. oh oh here we go......... DSC02942 - Copy.JPG DSC02944 - Copy.JPG DSC02946.JPG
     
    loudbang likes this.
  22. Harv
    Joined: Jan 16, 2008
    Posts: 1,367

    Harv
    Member
    from Sydney

    Did you break it Carl, or just some maintenance?

    cheers,
    Harv
     
  23. didn't break it just going from 3.42's to 5.50's in the rear end to try to increase my 1/8 mile times, plus since we have her apart I really need to do some maintenance on her besides just an oil change. I can't complain since this will be the first real maintenance in 10 years:):)o_O
     
    loudbang likes this.
  24. patsurf
    Joined: Jan 18, 2018
    Posts: 1,920

    patsurf

    you are WAY too lucky--cool!
     
  25. coreythompsonhm
    Joined: Jul 16, 2012
    Posts: 99

    coreythompsonhm
    Member

    Way cool Carl!
    question as I am going to be building a Flathead for a FED… are you running a potvin 425 eliminator cam? I had Pete grind me a few as I had good cores.

    As far as your alcohol setup, what static compression ratio are you running?
    I need to build the Flathead for my model a first but I am planning my build with the 425 eliminator, blown and on alcohol.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.