Register now to get rid of these ads!

Hot Rods My new 57 Chevy 210

Discussion in 'The Hokey Ass Message Board' started by Xman, Nov 24, 2024 at 6:55 PM.

  1. Xman
    Joined: Nov 17, 2011
    Posts: 556

    Xman
    Member

    I just bought a very clean 57 210. Its rust free with a fresh black paint job and stock replacement interior. It has a stock 283, powerglide. The previous owner installed 17 and 18-inch mag wheels and tires.
    I will be going with a 327 and muncie 4 speed but first I need these tires and wheels off the car. I will be going with 15 inch wheels but need help with width and back spacing.
    What have you 57 guys run?





























    /
     
    Tow Truck Tom likes this.
  2. Moriarity
    Joined: Apr 11, 2001
    Posts: 33,753

    Moriarity
    SUPER MODERATOR
    Staff Member

    Not a 57 but a 55 is pretty close. 15x6 with 3 inch backspace and 6.70-15's
    55ccr.jpg 55ccr2.jpg 55elegance3.jpg 55salina.jpg
     
  3. Tow Truck Tom
    Joined: Jul 3, 2018
    Posts: 2,593

    Tow Truck Tom
    Member
    from Clayton DE

  4. wheeldog57
    Joined: Dec 6, 2013
    Posts: 3,524

    wheeldog57
    Member

  5. Xman
    Joined: Nov 17, 2011
    Posts: 556

    Xman
    Member

    Wheeldog57, could you get a 15X8 in the rear? If so, what back spacing?
     
  6. Xman
    Joined: Nov 17, 2011
    Posts: 556

    Xman
    Member

    I'm having trouble loading new pictures, 100_1257.JPG 100_1259.JPG so I'll add one of a 57 I had several years ago. This is the look Im going for but with larger rear tires and wheels. I don't remember what these were.
     
  7. DDDenny
    Joined: Feb 6, 2015
    Posts: 20,145

    DDDenny
    Member
    from oregon

  8. Johnny Gee
    Joined: Dec 3, 2009
    Posts: 13,437

    Johnny Gee
    Member
    from Downey, Ca

    If I’m being paged about 15 8’s, yes they’ll fit. 4 1/2” back space is the ticket. These only come close in 4 1/4” & 4 3/4” back space. So a 1/4” solid style wheel spacer and the 4 3/4” back space got them in with a 275/60/15. (Note, stock rear end) IMG_3314.jpeg IMG_3315.jpeg
     
    Last edited: Nov 25, 2024 at 7:21 AM
  9. Super/Stock Poncho
    Joined: May 11, 2009
    Posts: 193

    Super/Stock Poncho
    Member
    from Missouri

    IMG_7096.jpeg IMG_7095.jpeg
    Fronts - 15x5 wheels on 205/75 tires
    Rears - 15x7 wheels on 235/70 tires.
    Don’t laugh at my low hanging passenger tailpipe. Hanger has been replaced since photo was taken.
     
  10. wheeldog57
    Joined: Dec 6, 2013
    Posts: 3,524

    wheeldog57
    Member

    Neat stuff on here. @Xman I had corvette ralleys when I first put the Chevy together but they didn't really fit. Had to pull out the quarter panels to get wheels on and off. Looked cool though. These tri-5s are just like second generation Novas, not a lot of room in the rear.
    15x7s for me
     
  11. Johnny Gee
    Joined: Dec 3, 2009
    Posts: 13,437

    Johnny Gee
    Member
    from Downey, Ca

    @Xman IMG_3435.jpeg

    ^^^^^ Those rears scream stock Chevy 15 7’s with 255/70/15’s.

    That’s what’s on the back of the avatar 56. Clearance is great. On and off easy. IMG_3436.jpeg IMG_3437.jpeg
     
    Last edited: Nov 26, 2024 at 8:43 AM
  12. Squablow
    Joined: Apr 26, 2005
    Posts: 17,781

    Squablow
    Member

    I think I have 7" wide wheels and 225/75's on the back of my '57, and it's already kinda tight. They don't have room for a ton of width, but you can get quite a bit of tire height in there, which is usually my preference anyway. I'm pretty sure you can get an 8" wide wheel in there but it has to have really exact backspacing, the right size tire, and probably air shocks to push the springs down to get them in there, nothing you'd ever want to change on the side of the road.
     
    Packrat likes this.
  13. 15x7's and I cant remember the backspacing but its like 3ish inches or in that range.
    60411077_3115942911752775_6589998266211893248_o.jpg 60430170_3115942351752831_8250120726615425024_o.jpg

    You can get a 15x8 under the rear of the car, usually have to unhook the shocks and let the rear drop to mount.
     
    Tickety Boo and Squablow like this.
  14. brigrat
    Joined: Nov 9, 2007
    Posts: 5,851

    brigrat
    Member
    from Wa.St.

    If the 283 is a runner & 4 sale I am in the Wenatchee, Wa. area and interested. I also have the makings of a 301-302 if interested....................................
     
  15. partsdawg
    Joined: Feb 12, 2006
    Posts: 3,628

    partsdawg
    ALLIANCE MEMBER
    from Minnesota

    I rolled the inner lip to gain a little more room on my last '55 to run wider tires.
    Even with that I had to jack the body up and take a shock loose to get enough clearance to get the tire off.
    Your '57 should be good with the advise given above
     
  16. 55 gasser pickup
    Joined: Dec 17, 2010
    Posts: 529

    55 gasser pickup
    Member
    from utah

    These are 10 inch wide tires on 8 1/2" wheel on my 56.
    Back space is 4 1/2" i beleive.
     

    Attached Files:

  17. I ran 15X8 'vette ralleys. They had the same offset [4"] on both front side and back....zero offset. Ran them on the front and back...........Had no rubbing issues I can remember. 57chevy.jpg
     
    Johnny Gee likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.