Projects 1955 Pontiac gasser build

I got a question. So I'm at the stage of my build where I'm trying to put my engine and transmission in the car and build mount and I'm following your advice and building front engine mounts out of square tubing and I was wondering what are you using for a rear transmission mount I saw on your post that you used some side-by-side mounts for the transmission but since we're running aluminum turbo 350 and 400 I didn't think that we could do that. I ordered a Chevy convertible rear transmission mount for a turbo 350 conversion because the Chevy convertible has an X frame similar to our Pontiacs so I figured that would be a good place to start. Would like your thoughts

Sent from my SAMSUNG-SM-N910A using The H.A.M.B. mobile app

 

Pontiac in a Pontiac, like it!!!!!!!!!!!!!!!!!!!! If you happen to see an extra pair of front seat skirts, let me know, a buddy needs a pair for a 56 Safari that he is working on.

 

This is a week old but since no one addressed it...........I'm using a Muncie 4 speed but we simply built a simple mount.

 

Sent from my SAMSUNG-SM-N910A using The H.A.M.B. mobile app

 

Cool so that's essentially what I got. Thank you sir!

Sent from my SAMSUNG-SM-N910A using The H.A.M.B. mobile app

 

I do but don't know if I want to separate them from the seat. I have my 2dr seat still with skirts

 

done racing for the year went 10.56 as my best. I plan on filling some more holes over the winter in the body. may put in a bigger stall and see what happens

 

Ya done Good. I been following from the start and 10.56 is nothing to sneeze at.

 

Yeah, that should work. Or easily be made to work.

 

Making a few small changes, i picked up an old set of skinny slots so I can have some proper tires for racing at 125 mph+. Also got ahold of a nice insert for the hood ornament that will be lit

 

Thats a cool looking hood ornament!

 

The ornament is for a higher level Starchief, the Chieftain sedan would have got the plain airplane looking piece without an insert . So it doesn't really belong on a a sedan or don't know about a g***er either, but I sure like the way it looks. Can't wait to get it mounted and lit up in the dark. My tach backlight is wired so anytime the car is running is on so I don't have to mess with lighting switch, will wire up the hood ornament the same way.

 

Screw it it will look good.

 

Yup, I agree. If you ever run night drags it'll be cool as hell shining up there in the front.

 

Speaking of tachs I have been tossing the idea of getting a gto hood tach and putting it on my 56 Pontiac. Any thoughts?

Sent from my SAMSUNG-SM-N910A using The H.A.M.B. mobile app

 

Lighted good ornament finally. Got ladder bars done, housing floaters next

 

Lost 3rd in the trans and ended up with one with a transbrake. Got a nice pic from the Meltdown Drags , been waiting to get the wheels off the ground nice. I'm told it went up higher than the pic. Best p*** was a 10.56.

 

Wow that's moving for a big car!

 

Very well done!

 

Did the "Lighted Indian" lead the way.

 

Very cool, great pic of the wheels up.

 

Yes it did, should have a good pic from someone from the night racing that will show up good. The p*** also had my best 60 ft with a 1.40

 

good job Bill

 

Congrats, that lit up ornament should be good for a tenth! Looks cool as hell. Nice to see a Pontiac out there! Lippy

 

Hey guys been a long time. Upgraded to a bigger aftermarket Pontiac block. Cars been 9.96 @131. Car pretty much looks the same.

 

Any winter upgrades ?

 

my 3 piece fibergl*** front end that I had built is now a 1 piece. still to build a frame to have it slide forward and tilt.