Hot Rods T-Altered unearthed, resurection started, Milwaukee car raced at The Grove

Made a little more progress, side tracked with other more important stuff, got some hoops bent up, had a buddy draw some rear end mounting brackets up and got then cut out, got rear roll bar in and rear end brackets tacked in and rear tacked in, then got the body mounted, now time to start getting the motor/trans mocked up/mounted

 

Looking great . You’ll be tearing down the drag strip soon . Looks like you’ve cornered the market on headlight buckets

 

Good stuff man! Can't wait to see it as a roller!

 

Score !!!!

 

I've never seen an anvil thats shiny from constant use. Carry on

 

Titus could build a whole hot rod just using the parts thrown under the workbench.

 

You may be thinking of Bill Wendt, wild street altered. I'd post a pic but don't want to derail the thread.

 

I think you're right.

 

Made a bunch more progress, rounded up some killer palamides 18” 12 spokes, found a lakewood bellhousing, got the clutch-flight attached to the hemi, got it slung up in the chassis and got motor mounts made and mocked up the rest of the motor including the hemi stack injector. last night i tinkered on headers

 

That’s coming together nicely!

 

very, very nice.

 

I can hear the nitro now…

 

Clutchflight included or did you have one. Pretty rare as well. Super cool find! Looking forward to seeing it progress! Thanks

 

i bought it locally about 10 years ago, been on the shelf waiting for the perfect project!!

 

HELPFUL CLUTCHFLITE HINT: Do NOT shift to Neutral and kill the engine after going through the lights!
The pump will stop pumping and starve the output yoke of lube, seizing it onto the tailshaft bushing. That will stop your driveshaft RIGHT NOW! and lock up the slicks.

Ask me how I know.

 

Most Excellent
Dan

 

Titus, Quain Stott just picked up one of these (his is a little later version). He might be looking for some others to play with, just saying!!

 

Very cool

 

I can guess how you know, but could you say what you found is correct?
I'd****ume neutral, engine running still pumps, but you can't read the plugs.
I'd also****ume clutch in isn't pumping, the same as engine off.

 

I ran a clutchflite behind my six banger altered. The six cylinder drag engine is particularly susceptible to oil starvation on decells because of the long oil pan. I had previously run a clutchless 4-speed and got into the habit of
hit the traps
flick 'er up into neutral
kill the engine
hit the brakes
When I switched to the clutchflite I continued to use the same method of shutting down. Since the clutchflite has no rear pump the trans is left with no oil pressure. The slip joint / yoke was pressure fed oil and it starved with no oil, seized the yoke on the bushing, and locked up the rear axle at around 130+ mph.
BoyHowdy that will raise the pucker factor of a ride in an already intense experience of driving an altered.
That was one of the reasons I removed the clutchflite, in addition to slider clutch maintenance issues, and improvements in Powerglides and converters.

 

Caught some of this build on Insta. But can always see more of it. So following. Great looking drag car

 

i realized the forgot to do an update, i had the car at GSTA’s 67th annual rod and custom show back in April, i had been busting***** on it to get it rolling for the show, turned out pretty good, still need to build a motor for it at some point and of course lots of other stuff

 

Sweet

 

Is that your "Altered Ego"?! Love it.

 

TITS!!

 

That is incredibly cool! It's great that you found it, not too many folks could bring it back to life.

 

Great match to the old pic! Fine looking machine!