Hot Rods 29 RPU- "Street/Strip" B/SR Build - Marty Strode

Seam sealer? In a race roadster pickup? Is it required for some fuel isolation rule?

 

Roger that!

 

Cool thank you for the reply and photo. I’ve considered a flange on the inside or butting them with a small gap and covering the two edges with a split rubber fuel hose that would be tight and fill the gap when it’s all together. Flange seems the better options though.


Thanks again!

 

I've already done that trick myself!.
Never thought of using the tool post to hold the emery cloth.

Thanx, for the tip Marty.

 

It won't always be a racer, and yes with Fuel Injection you are dealing with some pretty good pressure and volume, and it need a good seal. Besides, I am going to make and insulator pad for the interior side of the firewall.