Projects Picture request: Ford 1933/1934 dash with 1937/1938/1939 gauges?

I’ve had this idea of putting ‘39 gauges in a ‘34 dash, but would like reference pictures, if anyone is holding?

thanx in advance!

BR, Dannerr

 

Just a quick bump back to the front page

 

Gauges and second glove box door has arrived, loosly mocked up:

 

Might have to squint a little bit here ya go painted the glove box door because it was distracting me lol

might put the center gauge up a little higher now that I’m looking at it some more

 

This is great- thank you very much, @Tim!

 

Would you mind giving it another go, @Tim ? Have been looking at this picture on every toilet break since saturday, and now I also are annoyed with the out-of-center tach!

 

Btw, the bolts on the back lines up, but something is off…

 

Sure if I get time this week I will

 

Hey Dannerr
Cool and different

 

Thank you a million, @Tim! Will print this and put in the box with the gauges, so I don’t forget!

 

Cool I mostly tried to make the center gauge have the center line up with the centers of two on the left half

 

As I wanted- again, thanx a million!

Thank you, @Ford72!

The story is- I found the tach at a swap meet in April 2016, and at some point, I noted, that ‘39 standard (as I could google) looked awfully similar. When I was kicking about these ‘34 dashes, that I bought semi-local, I tried the tach, but it was too small- so I finally dug up an old add for a set and ordered them- thanks for the deal, @ironandsteele!
While waiting for them to arrive at shippers, to be consolidated with a spare oil+temp+amp+gas gauge and a crusty glove box door, I thought that someone might have done this already, and someone else might have taken a picture of that- therefore this thread is a picture request.

Will update, as the project progresses, but don’t hold your breath- it WILL take a while, most likely years, before commencing.