Working on a 37 chevrolet with updated suspension but can't seem to come up with what it is Narrowed the brakes down to very early Mazda/Ford Courier pickups Brake parts are Akebono 9 inch rotors found some calipers (we think) but no 9 inch rotors only 10 inch See pictures maybe someone will recognize Car was built probably in the 80s Any help Thanks in advance Here are some additional pictures of the front suspension This suspension has shocks and the lower ball joint has one thru bolt and a single bolt for stability see image View attachment 6371150 View attachment 6371151 View attachment 6371150 View attachment 6371151 View attachment 6371152
wonder why rockauto only shows drum brake parts for the early Courier? wouldn't hurt to get some better pictures, showing the whole front suspension....just in case someone might recognize it. Just stand back a foot or two further, when taking the pictures.
Ford Courier '72-'85 (mini truck) = Mazda b series, disc brakes were available in later years. I believe those were all 6 x 5.5 bolt pattern also, but I recall a funky disc with a 'hat' that could probably be re-drilled to a different pattern.
Here is a picture of the disc and hat bolt pattern is 4-1/2x5 The disc is 9 inch but can't only find 10 inch
did you remove a few pictures of the calipers? where it had letters/numbers The other pictures are great, unfortunately can't find anything like that lower ball joint anywhere
That adapter hat thing on the disc is what I recall, except in 6 bolt, from some brake jobs back in the '80s on a Mazda B. But that was a LONG time ago! Here's a pic of a '73 Courier from a Bring A Trailer ad - similar-ish but not the same:
Highly suggest measuring those rotors in all dimensions. Diameter, thickness, height, registrr bore and bolt circle. Metric will give you accurate numbers. Hub over rotor design is more common from the import market. Datsun/Nissan was a fanboi of this design. For a 9" solid rotor, if it is a front HOR type, maybe look at Toyota Tercels. Otherwise if the rotor is a 9" version of the 10" Mazda Courier, dimensionally, might be easier to simply have the 10" rotor machined down to 9". With the solid rotor I would not be worried about balance issues that a vented rotor may have. Albeit that front brake setup clears drum type rims. Would be a shame to not utilize that feature.
Very similar on the cross member for sure The lower ball joint that are on mine appears to be like these which are for a mazda hilux has a 3 bolt ball joint
The Jalopy Journal
