Technical 32 heavy axle or what?

Here's another axle I picked up guy passed away had a bunch of junk in his backyard







Yes I know the spindles have been ground down for where the backing plate goes..

 

Distance from the kingpin hole to the wishbone hole looks just a little to long to be a 1932 axle . Really need a "flat"photo to see properly.

 

No, looks like a 33-36 axle to me.

 

I think it's later than a 1932. HRP

 

Two inch spring perch?

 

alchemy nailed it right

 

I think it is a 32 axle. The reason is the radius rod pad looks a little sunken. Only 32 axles were that way. The I feature on the side is blurred but I think that is from chroming prep. I hope I am right as it is an interesting piece.

 

This is a 36 dropped by mordrop

 

View attachment 6429349 View attachment 6429597 View attachment 6429349 Here is another view.To me it is a 33-36 .Second pic is of a bone stock 32 front axle assy View attachment 6429349

 

The whole face looks flattened, real wide edge not thin like regular.

 

Here is my 32` front axle.
Regards Harald

 

Hard to tell from the angle the pictures are taken at. Spindle appears to be 1932-34. To differentiate 1932 from 1933-36 axles, need to only glance at two areas - the 32 axle is recessed where the wishbone is attached and the axle from the wishbone mount to the spindle has a compound curvature to it.

 

33-36

 

I would like to buy that 33-36 axle. PM me.

 

Guide...

 

I am going to have to look at this better.. I thought I had pic on phone to look at shape from wish bone to spindle.

 

This is a interesting piece



Looks S to me going to spindle





Recessed perch mounts



But why is there taper in center going to.perch

 

Cause it’s just a 33-36 axle.