Register now to get rid of these ads!

Hot Rods Big Daddy's 55 2 door wagon gasser

Discussion in 'The Hokey Ass Message Board' started by Lloyd's paint & glass, Jul 1, 2024.

  1. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,852

    1-SHOT
    Member
    from Denton

    I have always liked Mechanical
     
    chryslerfan55 and porkshop like this.
  2. tomcat11
    Joined: Mar 31, 2010
    Posts: 1,109

    tomcat11
    Member

    Yeah, same here. For me it was Raybestos wheel cylinders, brake shoes, and brake hoses. When I opened the box I remembered what you said in your truck thread...
    Then I said Fuck.:mad:
     
  3. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    Lmao! Yeah everybody told me to buy only ac delco ball joints for my 57 wagon, so I ordered them, and they came in with made in China on the box :D I ordered rear wheel studs from mosier, and I ordered a 5 point harness. Think I'll leave the bearing alone for a bit, change it before the tri five nationals.
     
  4. blue 49
    Joined: Dec 24, 2006
    Posts: 2,061

    blue 49
    Member
    from Iowa

    Lloyd's.jpg
    Sounds like you're getting it ready to race. I'm pretty sure you'll have to do something about the fuel filler in the passenger compartment too, if you haven't already.

    Gary
     
    chryslerfan55, porkshop and enloe like this.
  5. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    Do you mean a cover? It's a certified fuel cell, roll over vent, etc. If they start being a bitch, I'll load it up and go back home lol... it's a damn street car, I don't want a drag car.
     
  6. blue 49
    Joined: Dec 24, 2006
    Posts: 2,061

    blue 49
    Member
    from Iowa

    I don't know if they'll allow some kind of a cover but there are rules about having a firewall with no holes between the tank and the passenger compartment. I thought I was going to have to remove my screwed in, 20 gage steel firewall at one track because they wanted to see my tank from the top. You can see from the bottom it was a new re-pop tank. They did let me make a couple of runs, as is, though. With lap belts and OEM wheel studs.

    Gary
     
  7. You could probably put a cover over it and pretend you use the stock gas door and filler. We have some pretty strict tech nazis here and I've never had my fuel tank checked before, battery box yes, but not fuel.
    You also should've been fine with just regular old lap belts, sometimes putting in "race car" shit just invites them to start looking harder at everything else.
     
  8. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    Yeah this shit is really busting my balls. Kinda like the TV bullshit. A street car is a street car. I'm pretty sure the harness thing is the gasser association rule.
     
  9. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    I'm sure they'd say something. Thanks for catching it :D
     
  10. atch
    Joined: Sep 3, 2002
    Posts: 6,159

    atch
    Member

    I'm wondering if you threw a ratty old piece of carpet in there if they's even notice...
     
  11. primed34
    Joined: Feb 3, 2007
    Posts: 1,518

    primed34
    Member

    I kinda think that street outlaw stuff on TV changed the definition of street car. Them things are way closer to a pro mod than a street car.
     
  12. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    Ain't that the truth!
     
  13. Stock Racer
    Joined: Feb 28, 2010
    Posts: 1,287

    Stock Racer
    Member

    Dam, you are famous. Here's another one.

    Lloyd.jpg
     
  14. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    I guess I need to prepare a speech! Lmao! I pulled the leaves, put the ladder bars back in, abandoned the panhard bar and went with a track bar setup. Still gotta do some adjusting, and see if I fixed the wheel hop issue. Need to install the 5 point harness, wheel studs, drop the side pipes, put some VP110 in the tank and set the timing up. Should be ready before next weekend, but the 100⁰ temps are killing my fat ass. Too humid to do much in the shop!
     
  15. chevy57dude
    Joined: Dec 10, 2007
    Posts: 9,233

    chevy57dude
    ALLIANCE MEMBER
    1. Maryland HAMBers

    You ain't kidding about the heat, bro. It's felt like a Kentucky heat wave in the Northeast this week. Got a little more done on my '55 before it started really cookin'. Keep on keepin' on!
     
  16. I work at a auto shop, all week has been 100+ in the shit shop. My ass is officially kicked into the ground, and one day to go yet.
     
  17. chevy57dude
    Joined: Dec 10, 2007
    Posts: 9,233

    chevy57dude
    ALLIANCE MEMBER
    1. Maryland HAMBers

  18. Oh Boy, Guys, St. Louis ain’t any cooler. I was fixing air conditioning on an International yesterday and measured ambient temperature at 107 in our shop.
     
  19. deathrowdave
    Joined: May 27, 2014
    Posts: 4,720

    deathrowdave
    ALLIANCE MEMBER
    from NKy

    I got stuck in traffic on the bike , sitting on an air cooled engine in traffic is what I now call STUPID . There is no way to describe a fried home grown corn dog !
     
  20. Moriarity
    Joined: Apr 11, 2001
    Posts: 35,589

    Moriarity
    SUPER MODERATOR
    Staff Member

    sorry guys... 65 degrees here today, 72 tomorrow....
     
  21. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    You're such an ass
     
  22. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    I worked an accident on the interstate from 2am until 4am this morning, got back to the station, finished my run report and back in bed. Big plans in the shop today, until I woke up and looked at the clock! It was noon :rolleyes: gathered my shit, came home, took a shower, and climbed back in bed. Tmrw is a new day. 1 month of that shit left and I'll get up sleep like a normal human again.
     
  23. Lloyd's paint & glass
    Joined: Nov 16, 2019
    Posts: 10,351

    Lloyd's paint & glass
    ALLIANCE MEMBER

    Last night I asked Missy if she's going to the drag strip next weekend, and she said well yeah, i said cool, we'll sleep in the truck bed. She called me a little bit ago and said she reserved a room, she ain't sleeping in no truck bed in this heat lmao
     
  24. 51504bat
    Joined: May 22, 2010
    Posts: 5,435

    51504bat
    ALLIANCE MEMBER

    Truck bed or Hotel doesn't matter. She sounds like a keeper to me but that's JMO.
     
  25. saltflats
    Joined: Aug 14, 2007
    Posts: 13,193

    saltflats
    Member
    from Missouri

    Guess I'm lucky that the heat doesn't bother me that much. It's the cold I can't stand.
     
  26. deathrowdave
    Joined: May 27, 2014
    Posts: 4,720

    deathrowdave
    ALLIANCE MEMBER
    from NKy


    Lloyd you’re a tough man. My last 5 years of work . I worker 5 to 5 , 6 weeks day run , 6 weeks night run . 3 on 2 off , 3 off 2 on . Hard ass job just to keep up with the schedule , tough on a marriage . It’s a young man’s shift , you grow old fast . I lived 35 miles from work , there were days I did not remember getting to work or returning home . Be safe my friend
     
  27. DDDenny
    Joined: Feb 6, 2015
    Posts: 21,363

    DDDenny
    Member
    from oregon

    But a nice ass!:eek:
     
  28. Dave, was it a Twin Cam? I inherited Dad’s Twin Cam FLHT and he named it The Nut Cooker after sitting on Lazelle Street in Sturgis.
     
  29. guthriesmith
    Joined: Aug 17, 2006
    Posts: 11,357

    guthriesmith
    ALLIANCE MEMBER
    1. H.A.M.B. Chapel

    Need to frame this picture! Very cool!
     
  30. deathrowdave
    Joined: May 27, 2014
    Posts: 4,720

    deathrowdave
    ALLIANCE MEMBER
    from NKy

    It was a Shovelhead . Back right edge of the rear head had me standing along side of it for a few minutes . No parade duty on that one ever !
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.