Customs 40 MERCURY CHASSIS

HI Guy's,

Has anyone had a new 1939-40 Mercury Custom Ch***is built in or around Los Angeles area , Or any other recommendations please.

Thank you in advance Gentleman

 

I’ve never seen a 40 Merc repro ch***is offered. I suppose someone could bend one up from a CAD file and a mandrel tube bender.

 

You would think like Scott's Hot Rods or Roadster Shop could build something like that

 

So, 1940 Mercury floor pan is different from 1940 Ford floor pan?

 

Definitely.

 

Why not use an original ch***is?

 

The floor pan may be the same, but the Merc wheelbase is 4" longer, (116") than a Ford. (112") I think its from the firewall forward, but I am not certain about that part.

 

What I'm thinking is, if the Merc is similar to the Ford ch***is, I'd start with one of the aftermarket Ford ch***is shops and have them modify their Ford design.

On the other hand, as Jeff asked above; what's wrong with the original ch***is?

 

The 39 and 40 Mercs were 4 inches longer and it was in the body. Thev 41 and up was made forward of the firewall. I had a 39 for several years and found many small differences from Fords of the same years.

 

There might be a ch***is for sale here:
https://www.jalopyjournal.com/forum/threads/1939-1940-mercury-convertible-parts.1338169/

 

I know of a 4 door that is being parted out and has a complete rolling ch***is that might be for sale here in AZ.

 

Yes longer and wider

 

1939-40 Mercury frames are not even close in design to 1935-40 Ford frames. I think the 1939 Mercury is the same as 1940 Mercury. Sketch is of a 1939 from an old book of frame diagrams (Tatum) .