Technical Ford steering wheel to shaft taper?

I got a fancy ford 39 banjo wheel to go on my 39 ford truck buy it won’t fit. The taper is different. It goes on halfway and has a lot of movement. I have the steering wheel that came off the truck and another truck steering wheel I got of eBay that both fit but this car steering wheel has a different taper.
I want to make this banjo wheel fit do I need to find the correct taper for I can get a reamer.

 

Splined taper or
Taper with Key way ?
It taper & key way , with out us seeing pic & there is enough material, taper steering wheel same taper of column shaft & file in the key way with mini files or jewelry files

 

I seem to recall (or not), that the taper is the same as a tie rod end, at seven degrees. If there's enough meat in the hub to ream it, that should work.

 

If it’s a big truck, the shaft is bigger, if it’s a pickup the shaft and taper is the same as a p***enger car.

 

yep I have a truck and I am trying to fit a car steering wheel.

 

What's chances that nice banjo wheel isn't from a Ford? Other makes had 'em too. But I agree that here should be enough meat to ream it out.

 

It looks like a ford wheel. There is a name on the back of the finger grooves. Best I can make out is sheller or sneller. The second letter is damaged. There is plenty there to ream out. But what size & taper?

 

Everybody has something like this. If you don't, you should.

https://www.amazon.com/dp/B005XUHKSM/?tag=atomicindus08-20

 

Have that but prefer this for a situation like this thread. It also fits the hub bore.

 

would I have to pull the steering shaft out to use that?