Hot Rods Fully Fendered '31 A Coupe Rear Axle Width?

Hello all,
Looking for your recommendations of what the ideal rear axle WMS to WMS width would be for a fully fendered '31 A Coupe with stock fenders, 16" x 4-1/2" Ford '48 p***enger wheels, 700 or 750 tires please.
Unfortunately my car is in storage and I can't get to it for measuring etc ..... this photo is the similar look I'd like to achieve.
Thanks in advance.

 

53 1/2 -54 28-32 Coupe , Roadster
Drum to drum .
S-10 2wd

( 28-32 truck not sure)

If where a Sedan 28-32 , a S-10 4x4 , because wider @ fender wel
Where rear sides windows lower there is humps for Tracks, Regulator & Gl***

 

btt

 

@31 Coupe
Just asking , did you not understand the measurements that I posted? does not matter if it's a S 10 rear or not those are the measurements,
My self done A's & 32 s
A&32 Coupes ,
A & 32 Roadster's
A &32 Sedan's

 

This is Sedan inner fender ,
This is why need the s-10 4x4 rear length
I believe 56-1/2 over the
53-1/2 54 , the narrower works I feel better Deeper front dish wheel
& if want you can add
1/4 to 1 inch spacer to move wheel tire flush to fender ,,, If to wide limited on
Wheel then will be way to wide , hanging tires out like late 60's 70s