I have a kit as described for my 38 Chevy p***enger car axle. I ran it about 30 or 40 miles and with my dropped axle from Nostalgia Sids. The stock 16" wheel is pushed out about an inch per side and rubs my fenders. So I had to swap the brakes out because I wanted to keep stock wheels.. The brake kit is almost complete. You will have to buy a couple grade 8 bolts and the hoses to make it work. It has brackets, all the mounting hardware, roller bearings and seals, rotors and calipers and ABS's ****ty directions. But Ill leave the calipers with all the bolts installed and labeled so you can have a reference for what goes where. I marked left side and right side so it should be a snap to install. Nothing to figure out. 15" wheels will clear the caliper too. I tried my artilleries and they clear. I paid $650 and I paid $100 in shipping for this. So at this price of $400 and Ill cover shipping you are way ahead! If you are going to run aftermarket wheels or the pickup wheels from the 80s, the offset wont matter, but it sure did with my narrow OEM 1938 wheels. Cheaper if you want to trade me for silver. See link below for pics Heere is the link #411 1938-40 Chevrolet Car 6 Lug Front Disc Brake Kit – ABS Power Brake https://abspowerbrake.com/cdn/shop/files/IMG_0914-Photoroom-2_823x.png?v=1710127214
bump - save yourself some money here. Everything is marked so you dont have to depend on the directions with the kit
The Jalopy Journal
