Features 1932 5-Window Henry Ford Steel Coupe 392 HEMI 6/71 Littlefield

The Kook's stainless 6" turnouts arrived. Car Chemistry baffles fit in well. I'm not going to have to cut down the baffles. They will fit into the header collector perfectly. Now I just need Sanderson to ship the headers!!!

Kook's Stainless 6" Turnouts w/Car Chemistry Baffles by All American 6 posted May 7, 2025 at 11:21 AM

Kook's Stainless 6" Turnouts by All American 6 posted May 7, 2025 at 11:21 AM

 

Sanderson finally sent the headers. Good looking product. I haven't started it yet. I'm hoping those Car Chemistry baffles work. I think zoomies would have looked better, but I wanted an off the shelf available header. I might have some custom zoomies fabbed sometime. & the Mickey's are back on!!!!

Edit: The baffles work. It's a loud car but not open header loud.

Sanderson Over the Frame Headers by All American 6 posted Jun 6, 2025 at 6:14 PM

 

I found a small crack in my Coker Cheater Slick. Goes all the way around the tire. I emailed Coker and they sent a free replacement immediately. Purchased about 6 months ago. Only about 600 miles on the tires with no burn outs.

Coker Cheater Slick by All American 6 posted Nov 12, 2025 at 3:01 PM

 

Pics taken at the 2025 Southeastern Hot Rod Show

1932 by All American 6 posted Nov 12, 2025 at 3:12 PM

32 by All American 6 posted Nov 12, 2025 at 3:12 PM

 

Great hot rod.

 

No burnouts?! Why not?!

 

I'm lov'n this coupe.....not knocking what you've done at all.... but for me I liked the look before, and questioning the weed burner headers...kinda T bucket looking... and I think the front tires need to be alittle bigger???... I was thinking zoomies on mine but talked my self out of the idea... I would just put the differant tires on the rear.... and last... are you mixing bias with radial tires???
this looks good


I put 5.50's on mine... probley gonna change to 5.00

 

All tires are bias. Drives like a tank - had a much better ride with the Silvertown radials. A vintage front tire looks good, but they're taller and I lose the rake. I kept the PAW headers. They can go back on at some point.

 

While driving, I keep getting told I have a brake light out. I get home and everything is working. I finally figured it out. If you look at the taillight at an angle, the light doesn't show as well. I might switch out to a newer taillight.
LED

 

funny. when I opened this thread I thought "that car needs slicks on the back"

 

Paint the inside of the taillight buckets flat white. Not silver.

 

LED not Traditional BUT I run them because bright during the day, the 10 or so led in each light.
Most Do not look if No 3rd brake light
Especially for a light that is small as
two eggs,
Try the white paint with the Led
1057 bubs.
On some newer vehicle the B,R & T blending together & are getting hard to see

 

Didn't Cal Custom make a similar scoop too?