Register now to get rid of these ads!

The Friday Art Show

Discussion in 'Off Topic Hot Rods & Customs' started by Jeff Norwell, May 23, 2025.

  1. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,963

    41 GMC K-18
    ALLIANCE MEMBER

    If you look closely at the tail lights that @jnaki depicted in his drawings of the Olds coupe, you will see the number 88, which is correct as it pertains to Rocket 88.
    As you can see on my photos, the tail lights are the same!
     
    Last edited: Feb 21, 2026
  2. Lobeck..
     
    JBurt and 41 GMC K-18 like this.
  3. All Holden Day '26 260120AllHoldnLunch.jpg
     
    Jigger, JimC, Deuces and 22 others like this.
  4. rusty1
    Joined: Nov 25, 2004
    Posts: 13,472

    rusty1
    Member

  5. 3quarter32
    Joined: Dec 10, 2010
    Posts: 685

    3quarter32
    Member

    I see 8 of the lil ****** Aliens
     
  6. 51pontiac
    Joined: Jun 12, 2009
    Posts: 525

    51pontiac
    Member
    from Alberta

  7. buford_59
    Joined: May 30, 2010
    Posts: 93

    buford_59
    Member

    I see 8 also. Thanks to all the artists. Look forward to catching the FAS. DoUg
     
  8. i.rant
    Joined: Nov 23, 2009
    Posts: 4,890

    i.rant
    ALLIANCE MEMBER

    Thanks FAS posters:D
     
    Jigger, 3quarter32, 49ratfink and 6 others like this.
  9. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 15,526

    Jeff Norwell
    MODERATOR
    Staff Member

    For the Ladies.....

    Screenshot 2026-02-25 at 8.05.08 AM.png
     
    Jigger, rust&patina, Deuces and 32 others like this.
  10. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 15,526

    Jeff Norwell
    MODERATOR
    Staff Member

    Disturbing the peace


    Screenshot 2026-02-25 at 8.06.21 AM.png
     
    Jigger, rust&patina, Deuces and 32 others like this.
  11. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,963

    41 GMC K-18
    ALLIANCE MEMBER

    Jigger, rust&patina, Deuces and 22 others like this.
  12. 57 Corvette ~ Bob
    Joined: May 20, 2009
    Posts: 2,029

    57 Corvette ~ Bob
    Member

  13. jnaki
    Joined: Jan 1, 2015
    Posts: 12,057

    jnaki

    upload_2026-2-27_3-24-54.png 1963 Buick Riviera purchased in the fall of 1962.

    Hello,


    I was once a teenager who had access to a discount purchase on any speed equipment or parts. It wasn’t as large as some established speed shops, but big enough that some of my friends used me to get them parts for a discount. We did not have an actual building speed shop, but a backyard garage where we started our engine building and hot rod/drag race work.
    upload_2026-2-27_3-27-18.png
    We were able to get our own speed parts at a discount, which was good for the teenage bank accounts. It was my brother’s idea to start a small speed shop that built engines and sold parts along the way. For us, no shiny parts were lined up on the wall. It was a working garage and storage for our Willys Coupe build. When friends came over, the workshop took on the mini-speed shop arena and it was fun talking about parts ordering/ sales. Perhaps, we did have a future going on for our new adventure…

    Jnaki

    So, after our drag race involvement for 4 years of every Saturday at the local Lion’s Dragstrip, now, I had the ability to continue our speed shop. We got parts for every one, made a little spending money and had customers building their own hot rods. Or, I helped, if the friend was not the most handy of mechanics.

    One friend’s older brother had just bought a 1963 Buick Riviera (owned a large construction company) and wanted to get some 5 spoke mag wheels. At the time the best place to get a good discount for us was Moon Equipment. They gave me a super discount on 4 American Racing Equipment 5 Spoke Mags for the Riviera.

    NOTE:

    One of the reasons that I bought the set of 5 spoke mags was that the older brother had an old balsa wooden surfboard with a rare sticker on it. I tried riding it and it was a little shaky, but it had some value then. It was shaped in the South Bay of Los Angeles in the late 50s.
    upload_2026-2-27_3-29-44.png
    https://www.jalopyjournal.com/forum/threads/supreme-wheels-on-1963-riviera.1312917/#post-15190928
    upload_2026-2-27_3-31-30.png The older brother no longer wanted the balsa wooden surfboard and now, I wanted a custom station wagon to carry the surfboard back to my back yard garage. It did fit inside of the 58 Impala with the backseat taken out. Now, I cleaned it up and stuck it in our teenage “study den,” until it took up too much room. But, now, we owned a rare wooden balsa wood surfboard.

    Those days are still around when we visit my brother’s house and see the pristine balsa wooden surfboard hanging on a wall, facing the ocean. But, what about the 63 Riviera? It is long gone, but the memory sparked a new artwork for me… My friend and I spent several weekends cruising around in the "new" 63 Riviera with the American Racing 5 spoke wheels. At the time, no one had the 5 spoke wheels on a new 63 Riviera. It just looked fast sitting there in the parking lot of the teenage hangout.

    But, old memories creates new ideas as station wagons take precedence as a custom daily driver. The extra space carries tons of "stuff." Suitcases, potted plants, trees, mulch and of course the latest of succulents to ward off the need for watering every day in this warm climate... Even my new/old surfboard would fit inside in its cover for trips to the beach and back.
    upload_2026-2-27_3-38-26.png
    Now, that is a fancy way to head for the coastal activities then and now… YRMV

     
    Jigger, 49ratfink, JBurt and 14 others like this.
  14. rusty1
    Joined: Nov 25, 2004
    Posts: 13,472

    rusty1
    Member

    ...my latest "board"
    DSCN4923[1].JPG DSCN4924[1].JPG DSCN4925[1].JPG DSCN4926[1].JPG
     
    Jigger, JimC, duecesteve and 29 others like this.
  15. themoose
    Joined: Dec 7, 2008
    Posts: 9,900

    themoose
    Member

  16. themoose
    Joined: Dec 7, 2008
    Posts: 9,900

    themoose
    Member

  17. themoose
    Joined: Dec 7, 2008
    Posts: 9,900

    themoose
    Member

  18. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,963

    41 GMC K-18
    ALLIANCE MEMBER

  19. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 15,526

    Jeff Norwell
    MODERATOR
    Staff Member

  20. gilty
    Joined: Jun 1, 2006
    Posts: 96

    gilty
    Member
    from Pacific NW

    Quick sketch from a surprise sunny Sunday a few weeks ago IMG_1669.jpeg
     
    Jigger, JimC, rust&patina and 31 others like this.
  21. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 15,526

    Jeff Norwell
    MODERATOR
    Staff Member

    Just marking their Territory.....

    642403545_18565341592040081_4437304548964951815_n.jpg
     
  22. i.rant
    Joined: Nov 23, 2009
    Posts: 4,890

    i.rant
    ALLIANCE MEMBER

    Thanks to all that posted this week,great work!
     
    Jigger, 3quarter32, 49ratfink and 8 others like this.
  23. ct1932ford
    Joined: Dec 3, 2010
    Posts: 13,497

    ct1932ford
    ALLIANCE MEMBER

  24. Mike Lawless
    Joined: Sep 20, 2021
    Posts: 867

    Mike Lawless

    A few weeks back, I posted up the car i drew, a Roadster Pickup for a local car show. The completed poster is now complete and has been published.
    Incidentally, this one of central California's premier car shows, on the streets of Old Town Clovis. FB_IMG_1772251904710.jpg
     
  25. Sharpone
    Joined: Jul 25, 2022
    Posts: 4,767

    Sharpone
    ALLIANCE MEMBER

    Thanks All for another wickedly wonderful FAS
    Dan
     
  26. palepainter
    Joined: Sep 28, 2004
    Posts: 377

    palepainter
    Member

  27. You people with talent hurt me. I wanted to be the guy that could do everything. I got left in the dirt right after Egyptian stick men. :) Thank you everyone for your continued effort. It is really appreciated. :)
     
  28. Mike Lawless
    Joined: Sep 20, 2021
    Posts: 867

    Mike Lawless

    This has always been easy for me, ever since my earliest memories. So easy, I couldn't understand why everyone couldn't do it.
    But then I tried singing. I guarantee no one wants to hear that. That put it in perspective. I think everyone has at least one thing they are good at.
    I've seen your metal work. You have talent my friend.
     
    Jigger, Okie Pete, Sharpone and 8 others like this.
  29. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 15,526

    Jeff Norwell
    MODERATOR
    Staff Member

    A new west coast show coming this year.. a group of fantastic guys.


    Screenshot 2026-03-01 at 5.35.54 AM.png
     
    Jigger, i.rant, ct1932ford and 27 others like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.