Register now to get rid of these ads!

Features Studebaker's lets see them

Discussion in 'The Hokey Ass Message Board' started by ZZ-IRON, May 20, 2010.

  1. Been awhile since the Stude was driving anround around WNY.
     
    LOST ANGEL likes this.
  2. jnaki
    Joined: Jan 1, 2015
    Posts: 12,054

    jnaki

    upload_2025-6-28_4-32-39.png
    Hello,

    That photo reminds me of the one I found back in 2020. I was doing a research on Craftsman Houses in So Cal and found this gem of a photo.
    upload_2025-6-28_4-33-25.png
    We grew up in an old Craftsman house on the Westside of Long Beach. It had wood siding, two bedrooms, built in bookcases and shelving as well as individual panes in French doors and windows. My wife and I have always liked the old style Craftsman style and did have some remnants in our home decorating over the years. Modern desert succulents, plus low water need plants give the updated Craftsman homes some upgrades.
    upload_2025-6-28_4-34-12.png While looking for different styles of Craftsman houses, I came across this gem sitting in the driveway of a $1 mil + house in So Cal. It looks like a chopped Studebaker Truck with a custom bullet nose. Appletons and portholes in the lowered hood, round out the obvious. Because of the shade trees in the area the paint could be a dark primer, as the shade may have created a two-tone effect on the truck.

    The more I look at this custom truck, it actually looks sectioned, too. The overall height is too low for just a lowered chopped truck. The patio chair barely fits in the doorway.

    Jnaki
    It was mentioned that it was seen at the 2010 Grand National Roadster Show. Is this the same Studebaker Truck? There are a lot of similarities in both photos.

    The Appletons look the same. There are two portholes in the hood. There is a little chrome trim over the center bullet grille. Also, there are wiper nubs but no blades. In the found photo, the headlights look like a non-stock seal beam, but high powered, high intensity lamp. In the Craftsman House photo, the headlight mirror reflector can be seen through the bushes. The stance, looks very low in both photos.
    upload_2025-6-28_4-35-31.png
    In its early form or primer stage?

    The Studebaker, primered truck just seems like the same truck in the Craftsman House photo painted differently. It was just one of those things that kept nagging for more research. Does anyone have a bunch of photos from the 2010 Grand National Roadster Show, either inside or outside?

    The only other bullet nose custom truck was on an old TV series from back East, similar nose, but not chopped. This So Cal version had many things going for it. The custom Studebaker truck might be for the young and flexible, as the entry and egress would be challenging for old creaky bones and joints.

    upload_2025-6-28_4-37-1.png TV show build...


     
    41 GMC K-18, Six Ball and 1952henry like this.
  3. 5w32
    Joined: Jan 17, 2006
    Posts: 1,084

    5w32
    Member

    Six Ball likes this.
  4. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,960

    41 GMC K-18
    ALLIANCE MEMBER

  5. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,960

    41 GMC K-18
    ALLIANCE MEMBER

  6. 5w32
    Joined: Jan 17, 2006
    Posts: 1,084

    5w32
    Member

    coming soon to my shop
     

    Attached Files:

    Six Ball and stillrunners like this.
  7. skooch
    Joined: Feb 7, 2007
    Posts: 875

    skooch
    Member

  8. stillrunners
    Joined: Aug 27, 2009
    Posts: 10,616

    stillrunners
    Member
    from dallas

    It has a 1955 hood but the side paint/trim looks like 1957 up.....grab it if you can !
     
    Apenaut and Six Ball like this.
  9. stillrunners
    Joined: Aug 27, 2009
    Posts: 10,616

    stillrunners
    Member
    from dallas

    Anybody making plans to come down Dallas way for the National Studebaker Meet in September - 23-25 I'm sure.....hasn't been down this way since Austin,Tx in about 1998.....drove my Daytona down there.... 1964 Daytona and me.JPG
     
  10. skooch
    Joined: Feb 7, 2007
    Posts: 875

    skooch
    Member

    1955 3/4 ton with a 259 and 4 speed. Been sitting in my backyard waiting for some affection for about 15 years now.
     
    41 GMC K-18 and Six Ball like this.
  11. fabricator john
    Joined: Mar 18, 2010
    Posts: 355

    fabricator john
    Member
    from venice fl.

    IMG_8013.jpeg Hey fellas ,, i have a studebaker truck gauge cluster i want to graft into my 27 tudor dash , im missing a few pieces , sombody cut the capilary on the temp gauge , i need a 2 wire fuel sender and what kind of a fitting goes on the oil gauge ? a male compression nut ? its very small ,, any guidance or pieces parts that can help PM me , im not afraid to ask or buy ,, thanks in advance ...
    fabricator john
    miss you dad
     
    Last edited: Jun 25, 2026
    41 GMC K-18, Apenaut and Six Ball like this.
  12. Moriarity
    Joined: Apr 11, 2001
    Posts: 41,105

    Moriarity
    SUPER MODERATOR
    Staff Member

  13. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,960

    41 GMC K-18
    ALLIANCE MEMBER

  14. 41 GMC K-18
    Joined: Jun 27, 2019
    Posts: 5,960

    41 GMC K-18
    ALLIANCE MEMBER

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.