Hot Rods Aluminum Rad Vibration/Movement Isolation

'29 Tudor w/SBC rad issue.
What are you folks doing with aftermarket aluminum radiators to isolate vibration and movement?
I blew out mine (after 7 years) at all 4 corners and the firewall to rad support rod area due to movement. I have a puller electric fan attached with the through the rad holders.
I have another rad to go back in but would like to know a way to help isolate this one better.
Ideas?
Thanks.

 

Most factory rads have rubber isolators where secured to the ch***is. If your mounts are failing, I would look for something similar. Another option would be to mount the fan separately.

 

I also built a bracket for my rods to connect to at the radiator end that ties the radiator and the radiator shell together.

This way I have the shell helping to support the radiator and the radiator isn't taking the entire load.

 

Thanks. Yes, I will be mounting the fan separate from the rad

 

Thanks. Now there's a thought!