triangulated 4-link for the 54 chevy

I'm going to be bagging the 54 to the ground soon, and I want to put a triangulated 4-link in it but I'm worried about it interfering with the rear seat. Any one done this, have any info or pics?

 

i am in the prosess and i looks like i will be able to hide every thing just behind the back rest of the back seat, i am going by measurements though because i dont have the body on the frame, i'll try to upload a picture of it. this is a rough mock up so don't laugh

 

The 4-link won't interfere with the seat and the notch won't either if you do it right. Check out this section of 50chevy.com...especially the gold and white pinstriped frame (HAMBer Gambino Kustoms '54): http://50chevy.com/photos/lowering


Bryan

 

here

 

here

 

wrong picts

 

wow dirty that setup sure cuts down on the amount of space it takes up, i like it. i think my bars are to long

 

front

 

It says "Low Life Fabrication" on your lower control arms. I did a web search and came up empty. Any info on them?

 

That 54 belonged to a freind of mine named Kenny. He was going to start up lowlife fab, but has run in to hard times. He made all the mods himself, when people said it could not be done. I should have bought that car.