Register now to get rid of these ads!

seat question for 32 ford

Discussion in 'The Hokey Ass Message Board' started by milkmankael, Dec 27, 2006.

  1. milkmankael
    Joined: Feb 18, 2004
    Posts: 150

    milkmankael
    Member

    I had read somewhere that a rear seat from a Chrysler Minivan will fit into a 32 Ford roadster pretty well. Can somebody tell me if I need to use the center seat or the far rear seat from one of these vans? Also, is the width of a 32 Ford pickup cab the same as that of a 32 Ford Roadster?

    I am looking to start gathering pieces for an upcoming project that started life as a 32 Ford pickup.

    Thanks in advance,
    Kael
     
  2. thx-138jr
    Joined: Oct 20, 2004
    Posts: 92

    thx-138jr
    Member

    I believe it is the back set out of the van. You will need to narrow it a little to make it fit. My dad did it for his 32 and it turned out nice and is very comfortable.
     
  3. HotRod31
    Joined: Mar 3, 2003
    Posts: 426

    HotRod31
    Member

    The middle seat fits an A model without narrowing it. It will also fit a 32 truck cab, but may be a little too narrow?.

    Later, Mark
     
  4. hodaddyo
    Joined: Aug 8, 2006
    Posts: 279

    hodaddyo
    Member

    its the middle seat, or try the back seat out of a jeep wrangler (the traditional soft top jeep what ever name it is.) or try and score a crash cart seat out of an old ambulance like i did. its the seat that the emt flips down to sit on while he works on you on the gurney in the back of the ambulance. i have one for sale if you are interested, it's gray in color and @40 inches wide. let me know
     
  5. tommy
    Joined: Mar 3, 2001
    Posts: 14,756

    tommy
    Member Emeritus

    I used the middle seat for my uncut Deuce P/U. It doesn't fold so I made hinges that bolt on the front edge where the seat risers were bolted. It tilts up for battery and storage access. Mine was free...I liked the price.:D
     
  6. jusjunk
    Joined: Dec 3, 2004
    Posts: 3,138

    jusjunk
    BANNED
    from Michigan

    Middle seat . I just picked one up tuesday for my 32 roadster. Mine was from a 92 grand caravan. The back doesnt fold but it really doesnt need to. The brackets that hold it to the floor of the van unbolt and the arm reat comes off in seconds. Wiht some too, of course:D. They are about 40 to 41 inches wide . There was a nice article in street rodder this issue about using and reupholstering one.
    I asked the same question about 2 days before I got the new mag!
    You should be able to fing one for about 50 bucks. I found 3 in toledo about an hour from me at a bone yard for 40 to 50. The one i got was a little under an hour drive so i went for that one. I even found one on egay that i coulda got for 9.95 but it was an hour and 45 minute drive 1 way so i p***ed.
    Dave
     
  7. milkmankael
    Joined: Feb 18, 2004
    Posts: 150

    milkmankael
    Member

    Thanks for the wonderful input. Getting the seat is not a problem, I just need to know which one to use.

    Kael
     
  8. hodaddyo
    Joined: Aug 8, 2006
    Posts: 279

    hodaddyo
    Member

    i tried a caravan seat at first but that car was pretty well channeled and the caravan seat had me sitting too high, plus i was broke and couldn't afford to have reupholstered. the ambulance seat worked out good.
    [​IMG]
    [​IMG]
    got it for 10 bucks at the junkyard, i guess to them what could it have possibly been used for other than another ambulance.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.