Register now to get rid of these ads!

Fiberglass Pedal Cars

Discussion in 'The Hokey Ass Message Board' started by bdierks, Mar 5, 2007.

  1. bdierks
    Joined: Sep 12, 2006
    Posts: 103

    bdierks
    Member

    Where can i get a realistic 32-34 ford pedal car. i found a site about 2 years ago that had really bad*** ones, made with fibergl***,that you could buy in a kit. It came with everything, just needed to be painted and put together. Well i cant find the site anymore. So does anybody know a good source?
     
  2. amsvette
    Joined: Sep 8, 2004
    Posts: 180

    amsvette
    Member

    I think you might be looking for Aerogl***, they had pedal car bodies/kits/frames/etc and some other odds 'n end fibergl*** stuff. I don't know if they are in business anymore. If you watch ebay, there is someone in California (I think) that has a dimensionally correct Deuce roadster body with the frame rails molded in. They look VERY nice, and they were not that expensive If I recall. I picked a different one up a few years ago for my son, it's ok but not that realistic in proportions. It's too small for him now, but my 8 month old will fit just fine...maybe I'll finish it someday. I can't find a picture of mine, but here's a picture of the other one I was talking about.
     

    Attached Files:

  3. mike budniewski
    Joined: Jul 30, 2005
    Posts: 327

    mike budniewski
    Member

    its not a pedal car but i have a 1/2 scale 34 ford roadster body. its real quality and never been painted still in the blue gelcoat. it fits a go kart type ch***is. all i have is the body and grill shell mike
     
  4. 55olds88
    Joined: Jul 23, 2001
    Posts: 2,386

    55olds88
    Member

    32 looks nice , problem is you would need a nice looking I beam etc to keep building on the good looking rails..... I picked up a 36 cabriolet recently for my 2 y/o and are now sniffing around for a donor for running gear, hopefully I can get this going in time for the boy to use it !! just decided I beter give the old trike I had and stripped down for a rebuild a quick coat of matt black and slap it back together before he is too big for it !!!
     
  5. bdierks
    Joined: Sep 12, 2006
    Posts: 103

    bdierks
    Member

    Ya, I think it was that Aerogl*** company. i wonder why they went under. looked like they had pretty good products.
     
  6. bdierks
    Joined: Sep 12, 2006
    Posts: 103

    bdierks
    Member

    Are there any other company's makeing the same body, and selling them in the kit with the complete ch***is?
     
  7. Max12
    Joined: Sep 7, 2010
    Posts: 1

    Max12
    Member
    from nil

    Hmm... i don't know exactly, but you could check on this site, i just came across it, and overflew it quickly, but it's really nice! You could find what you're looking for!

    http://voituresapedales.com/
     
  8. zzford
    Joined: May 5, 2005
    Posts: 1,822

    zzford
    Member

    If you are talking about the outfit in Minnesota, I believe they did fold. I had one of their trailers. The trailer looked good but the quality was pretty low rent.
     
  9. B.A.KING
    Joined: Apr 6, 2005
    Posts: 4,039

    B.A.KING
    Member

  10. wbrw32
    Joined: Oct 27, 2007
    Posts: 7,314

    wbrw32
    Member

    Looks like Max 12 dont read dates on threads,,fill out his profile page or do an introduction...
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.