need advice

what are the torque specs for a 350 tanny pan??

 

ok how bout tranny pan instead of tanny

 

86 inch pounds, or about 13 foot pounds i belive

 

don't know that but the best advice my Dad ever gave me was
"don't get caught..but if you do make sure you have covered your back!"
sorry I can't help any further!

 

thanks

 

I use a 1/4 in. drive socket, no extension, and only enough pressure to make sure they are good and snug. Don't crank on them until they break off

 

i think the specs are different for cork and rubber gaskets....???