cam bearing help!

can some one send me a dawring of a SBC cam bearing tool?
i think there is a dawring in a david vizard re-build book.

hope you can help me!!!!

 

I dont have a drawing but I built my own our of round stock. Turned a piece on my lathe that fits the inside diameter of the bearing with a shoulder to drive in the bearing. I have a 3' long 3/4" dia. piece of round bar turned down to 5/8" on the end that the driver fits onto. Those two pieces and a big hammer is all it takes. I can take a pic tonight if you want one.

 

i have found an old bearing so im gona make one from that.

thanks

 

Wil a pic do?



Click For Cam Bearing Tool - $25 at Speedway - can't make one for that - dunno about shipping over the pond...

 

Here's some pics of the tool I made

 

I made one up that looks just like that . I also made an end for the driver handle to slide through in the front of the block, keeps everything square

Flatman

 

ATD Tools
part # ATD-8620 is the picture posted

http://www.atdtools.com/Tools.html


Lisle Tool
Part# 18000

http://www.lislecorp.com/tool_detail.cfm?detail=143