Axle drop problems

So it probably wasnt the best idea to use a model A kingpin in my axle dropping jib but i had one so I did and now its stuck. any ideas on getting it out? I tried heat and beat the hell out of it but all i managed to do is break an impact socket.

 

bttt

 

no idea. bttt

 

Use your axle as a wall hanger, and Buy one from an Alliance member here on the board. There is alot to heating and dropping an axle i would not try it myself. Good Luck

 

Hydraulic press should do it. Oil it up first.

 

Re: Axle drop problems
<HR style="COLOR: #999999" SIZE=1><!-- / icon and ***le --><!-- message -->Use your axle as a wall hanger, and Buy one from an Alliance member here on the board. There is alot to heating and dropping an axle i would not try it myself. Good Luck

dropping the axle wasnt a problem but i should have used a solid king pin. I'm gonna try to cut the king pin out with a sawzall so i can get the axle in the shop press. i guess i bent the king pin while i was dropping it.

 

i dont think a sawzall will mark a hard king pin,best bet is like BONDOBOB said,press it out

 

hahaha...................shoulda left it for someone else..............us the later kingpins...........to get that one out use a br*** punch and wailon it.