sbc alternator mounting?

i have a 350 with no mounting holes in the heads. i bought a speedway low mount bracket. it sits way to low hits the frame in my car. i need brackets for something up top that don't mount to the head or require headers. any tips?

 

i got some mounting brackets from like a 67 327 off a chevelle

 

alan grove makes what you need...they have them for drivers side or p***enger side mount

http://www.alangrovecomponents.com/

speedway has one too for the p*** side


http://www.speedwaymotors.com/p/345...-Bracket.html?itemNo=alternator%20bracket


how Speedway's looks installed:

 

57-68 exhaust manifolds (rams horns) in most cars had provision for mounting a generator or alternator. Alternators were used beginning about 1963, so they changed to holes on the end of the manifold, instead of the side.

this is the early style:




this is the later style:

 

SoCal makes one as well. Mounts to the p***enger side using intake manifold and water pump bolts.

 

i used a late model airpump bracket to mount the alt on the p*** eng side it bolts to the 2 holes by the fuel pump cut some spacers to position alt with pulley used a 66? slider adjusting bracket mounted to water pump lower hose was tight but i put that plastic shielding around the hose worked fine for many yrs and a lot cheaper than mr groves stuff john

 

I have one of those speedway brackets like the one pictured. $10 if you want it. Scott 916-338-4327