tryin to hot rod a 56 for vic

want to lower my 56 vic but jamco is AWOL can anyone help?

 

Im using granada spindles on my 56 Countrysedan, a fellow hamber turned me on to the swap. You will need to ream the lower ball joint hole to match your existing spindles, but any machine shop should be able to help. BTW, the rotor will actually sits higher on the knuckle than the drum on the original spindles, so you should see a drop of about an inch right away. Plus there are aluminum spacers for the lower controls arms on ebay that would really put you in the weeds. hope this helps

Brad

 

JAMCO is not AWOL, Jim Genty (the owner & my dad) p***ed away last month, we are still taking orders, you may have to leave a message 707.544.4950, but we will get back in touch with you. We hope by Mid October it will be open full time and processing all orders and handling all calls live. Please be patience during the transition of the business. Thank you, and we look forward to taking care of your needs and caring on what my dad started 20 years ago!!!

Tony Genty