28-29 grill shell mounting

what do the original support rods that run from the firewall to the front of the car attach to, the rad? Anyone got pics of how they mounted their rad shell? I'm going hoodless.....Toqwik

 

the original rods go from small brackets on the firewall to a large bracket on the top rear part of the radiator, this has slotted holes for the rods to drop into, don't have a pic, but someone else will. the radiator also has side brackets for the rad. shell to mount to.

 

Phil has the right information. Come on, someone post a picture.

Frank

 

I would like to see what the bracket on the rad looks like.Toqwik

 

I can get you a pic a little later this morning when I get home from work.......

 

Here is a pic of that bracket on the radiator itself...

 

Another angle.....doesn't look too hard to make ...you could have a rad shop solder it on to a radiator....

 

Last pic....hope this helps...

 

Here is how I did it. Rods to bracket on back top of radiator. I used a modified ,37 ford bracket because it was
long enough to stand clear of the filler neck. Then the shell
bolts to small brackets welded onto the side straps of the radiator.
Hope this helps.

 

Thanks for the replies, that exactly what I needed to see...Toqwik