RPU bed opinions needed

Here is a link to the current project. It's a '30 Dodge, so keep in mind that she is a bit wider than your average A. Anyway, I picked up a box that is in pretty good shape and would like to hear some thoughts on what should be done to make this thing look like it has the correct proportions in relation to the cab. Should it be shortened, widened, lowered...what. The wheel base is not set yet and it is at 110" in the photos. I am thinking about stretching it out another 5-6 inches. Right now the box is just sitting on the frame kick-up. Any ideas will be helpfull.

http://www.directimagehost.com/is.php?i=149648&img=4920100_1049.JPG

I was hoping to get more pictures to link to, but the image host website went down on me. If you have any pictures that show good proportions, please post them.

Kurt

 

hard to say with out a direct side shot but yeah it looks like it could stand to be wider.

other then that id whack about ...6 inches? again hard to tell in the pic out of the back half of the bed, between t he wheel well marks and the tail gate. then drop the whole unit 2 or 3 inches.

i roughd up it in ms paint and it seems to look good. a better straight on side shot would help quite a bit


oh and as a side note weres the rpu?

 

http://www.directimagehost.com/is.php?i=149647&img=2601100_1043.JPG

http://www.directimagehost.com/is.php?i=149649&img=100_1044.JPG

O.k. here are a few more. I would love to see what photoshop can do...post them if you can.

Kurt

 

shortened and dropped

 

It's hell to not have ALL the body parts when building a car, isn't it?

 

Definitely shorter.