Place to find/buy progressive linkage for old 3X2 carb set-up?

I've found a swap meet 3X2 carb set-up for older 390 Ford and it looks like it will go on the 361 in the Edsel, its missing the linkage, any body got any ideas on where to go for the progressive linkage set-up for this?....

 

That is repoped, look for a Super Ford mag or Mustang mag. Stock stuff works great. They also have the fuel log and filters.........OLDBEET

 

Try Eelco...

http://www.eelco-usa.com/index.php?cPath=24_28&osCsid=a78324b4a83cf319150cb3cfab05cece

 

Stock Ford linkage is the ONLY way to go. It uses a crossover in front of front carb as the carb linkage is in the right side. EELCO would be a real pain in the *** to get to work. I think the rite linkage is under$100. Iv'e been runnin factory tri-power on a 390 FE for 35 years. Luv it!!!...OLDBEET

 

OT ( not trying to steal the thread) but I've got an eldebrock tri-power intake with 3 carter ww's that have positive/non-progressive linkage. Where do I find linkage that is progressive?

Same as the others listed?

 

www.eelcoequipped.com ; If they don't have a kit they will make it for you.

 

do not use eelco if you want what you paid for!!!!!!!!!!!!! learn from my mistake !

 

Speedway Motors

 

I second this!!!

You know who eelco is don't you?!!?? This guy's a crook!
A word to the wise!!!

Buy/use ANYTHING else and you'll be miles ahead!!!

 

Here's another source for 3X2 Carb Linkage

http://forwhatyouneed.com/carburetor_linkage_progressive.htm

You may need to contact them to find out which linkage would work best for your application.

 

I second Speedway

I used it on my Caddy 3X2

 

www.hotrodcarbs.com

Check out their 3 carb tunnelram too.

 

try rocco and cheaters in birmingham, alabama