Model A Frame

I found a model a frame and want to build a kool rod? I have never messed with an A before and was lookin for some tips. Thanks

 

Heres a tip Sell it to me I have a need for it

 

box it.do a search you will be reading for hours and hours.

 

I built a Model A frame and finished is earlier this year. Will be putting a 31 Coupe on the frame and blown flathead.
I used a Dagel's Street Rod X member and boxing plates, made oval holes in the boxing plates to match the X member, Z'd the rear 3".

Here is a picture or two and link to some of my earlier pictures on another site;

http://groups.msn.com/FordFlathead1932to1953/cobraschopped31av85window.msnw

So..................what do you want to do?????????????????????????

 

Thanks I'll do a search

 

Damn, that blue frame looks too good to cover up with a body!

 

http://www.jalopyjournal.com/forum/attachment.php?attachmentid=367532&d=1192928461That is a very cool ch***is! The head on view is unbelievable. It will be a shame to cover it up.chuck

 

Copshopcoupe,

Here it is mostly, but not totally covered.

 

It sure looks tuff. When you kick up the rear cross member on a model a ch***is with the stock spring do you need to cut out and raise the trunk floor or is there room for the 3" kick?
chuck

 

Is it an early frame or a late frame? If you are running a hood and stock radiator shell you want them and the body to match the frame so everything lines up (it's the front crossmember that is the difference).