Where to buy Mandrel bends?

I usually buy from Summit... but they don't have the radius I need...

Anyone out there know of someone who supplies quality mandrel bends?

I'm looking for 1 3/4" with a 6" radius and then 4" radius... a couple of each.

Thanks!

Sam.

 

I've been looking for 1 1/2 stainless, speedway seems to have a better selection. Have you checked them out?

Rich

 

Stahl headers sells what you need.

I had saved this link.

http://www.stahlheaders.com/Frame%20Tubing.htm

Rich

 

Have you checked Speedway?

 

Pertronix has large radius bends. http://www.pertronix.com/

 

this company has them in 2.00,2.50,3.00,4.00,5.00,and6.00" centerline radius.

http://spdexhaust.com/HomeB.html

-danny

 

These guys are down in Campbell so they ship fast http://www.magnumforce.com/ubend.asp

 

Timely post as I'm soon to start on some headers.
Thanks all.

 

Try Headers by Ed. I've bought from him for years. I cannot imagine him not having what you need.
One caution, he likes to talk and if you phone your order in he'll talk your leg off as long as it's on your dime.

Frank

 

Thanks guys!

Sam.

 

I have not seen any 6" radii, however Here a couple of sites that offer low cost mandrel bends.

http://store.racing-solutions.org/mandrelbends.html

http://www.mazzurisuper.com/shop/html/Products/gMildSteelTubingMandrelBends/gMildSteelMandrelBends/

Here is a source for nice Collectors:
http://www.spdexhaust.com/CollectorsB.html

N B R

 

schoenfeld (sp?) was most reasonable last time I bought them.

 

A second vote for Magnum Force. If you order off the website - super fast shipping.

 

Kiwi Konnection , in Bakersfield sells em .

 

JCWhitney has a bunch too.

 

I've used the Chassis Shop several times and had good luck. They sell the hard to find tubing donuts which work real well for tight bends. Their website is www.chassisshop.com

 

+1 for Chassis Shop. There's also Heartthrob here in MN. A lot of their stuff is available through Whitney.

 

If your looking for exhaust stuff......try:

burnsstainless.com or dr.gas.com

I use them both & they have a vast selection.

Paco

 

+2 for the chassis shop. I hate their catolog. I want at least one of everything.... The staff are all knowledgable. One of the female staff builds Rock Crawler Rigs.

 

You might try www.drgas.com I bought some tube from him a few years back. I think he had different sizes available. Speedway has a few also. Flatheaded

 

stans headers in auburn washington has what youi need. they are also made out of 14 guage so they will hold up longer if you are using them for headers.

 

I'll second Schoenfeld. Like HR said good prices and good quality. FEDER