Need sources for Holley 94 linkage and kits

Looking for the best sources for Holley 94 stuff:
Need a progressive linkage, extended throttle shafts and a couple of rebuild kits. Also jet and power valve reccomendations for dual setup on almost stock (edmonds 2x2,mild cam, headers) Flathead. thanks

 

I like Charlie Price at Vintage Speed.Com..He has it all..
Duane.

 

dont expect charlie price to come back quickly - hes not known for his speedy service.

 

http://www.eelco-usa.com/

 

I got the carb rebuild kits for mine at my local NAPA. About $35 each after taxes. Rebuilding them this week...
jay

 

That looks like a great set up.
jay

 

ask ****ster27 here on the HAMB.........

 

Jets - the 8BA's came with 51's. Check the ones in the carb now - if around this go with those. Power valves - again, 8BA's came with a 7.5. Try a 4.5 in both for a starter. I don't have an info on stock 94's other than the 8BA's.

The accelerator pumps in most of the kits you buy today are not the correct ones. The correct ones are 2.60 inches. The ones usually supplied are about 2.39 inches, supposedly a Merc? pump. I get mine from a place called Ken's Carburetors. (igadore@sbcglobal.net) His kits are more expensive than Mac's, but they have the steel tip needle in them and the right accelerator pump. He also rebuilds carbs, supposedly very good but I do my own.

 

There's a older guy in Spartanburg NC. His name is Rudolph Faltermeyer. He's the man with 94's, linkage and stuff. Sorry don't have the number.

 

Sorry, that's Spartanburg, SC

 

Somebody please post that guy's # ^^^^^^^ PLEASE, I need help to!

 

pm ****ster27, he's a super nice fella. should have anything you need