HELP W/36 Ford Coupe!

I need the measurement for the stock taillamps. From the bottom edge of the rear fender along the peak to the stud hole. If anyone has a stock fender to measure I will greatly appreciate it!
Thanks, Brad
brad@dornautocraft.com

 

My tailights are on my fender but it looks like 10-1/2"

 

Thanks Mike. Is that to the back edge of your housing?

 

That's my guess to the lower stud. I can give you to the housing if that will help.

 

Brad, I measured along the center of the fender and it's 11" to the bottom of the housing. My tape followed the contour of the fender.

 

been a long time since my 36 coupe but I think that there was a support bracket that bolted to the body where the fender bolts on. If you have one of these simply match the holes in the body and you will find the location of the tail light stand.