Top Shift Toploader 3.03 Ford 3 Speed ?

I've done a search on installing a "Top Shifter" on a "Toploader" Ford 3 speed 3.03 transmission and have only found 4 speed info using the Jeep shifter. Anyone know if this conversion is possible and what parts are required? Thanx in advance, Rocky

 

Jeeps also had a 3 speed with the top shifter. Conversion should be similar to the 4 speed setup. The T-150 was the 3 speed used 76-79, and the T-176, 177, and 178 were the 4 speeds used 80 to 86.

 

Check here: http://www.modelaonly.com/about_us. This guy is in Norcal and uses the Ford F-150 trans from a six cylinder, I think. Don't know what you're after, but this might be it.
Regards
Jim

 

Forgot to add.. If you're going to adapt to a Flathead, contact Gene Sanders, at M.E.C. He manufactures a really nice adapter for this application, or you can use a truck bellhousing.
Jim

 

www.modelengineeringco.com

 

just find a T150 shifter, it's almost plug and play, find mine on egay for $30

 

Got it, T150! Thank You

 

I thought it was the trans that came in the CJ5. If that helps?

 

Some info came out here:
http://www.jalopyjournal.com/forum/showthread.php?t=270401

 

Toymaker, I ran a thread on this about two weeks ago under BorgWarner T-15 with Jeep Shifter. Lots of good info there.

 

That's the thread I linked...

 

Great info, Thanx again guys!