ranchwagon floor pans

I may finish up my floorpans this weekend. So I thought I would post a few pictures for everybody to laugh at. Also installed rocker panels and patched up the inner rockers and the lower cowl and toeboards. Nothing fancy I just hammered out some 18 guage and rolled a few beads in them. My welding is not the best, but I guess it will do. Also a picture of a floor support that I almost finished before we popped firecrackers yesterday. I will post a couple of after pictures when I get all the tools and junk out of it

 

looks like a good start you have going! your saving a shitload making them because they don't give them away and the one i have seen fit ok at best.

 

Nice work. Post some pics of the whole thing hen you get a chance.

 

Who's laughing? I think you're doing a great job. Doing it yourself with what ever tools you may have at hand beats dialing 1-800 anytime.

 

we got off to a slow start on the 55/56 ford floors, but here is the new stuff we have this year,
inner rockers coming soon, got some other stuff to including rubber,starting 53/4 chev now fyi

 

Some more of my cobbelry. Didn't get finished, but I took a few more pictures.

 

The last corner welded in.

 

59 59 59 59 59 59!

 

looks good! after the carpet goes in nobody will know unless they crawl under and if you undercoat it 100% hidden.

 

Thanks. It will get undercoating and I'm, debating what to coat the inside with. Prime it and paint it , or maybe try por 15, see how it works.

 

I bought my 57 RW pans from EMS. Fit like a glove, high quality.

 

I got a little patch put in the kick panel and finished welding in the driver side front floor pan. Then sanded it and brushed on some primer and some chassis black. All you can see in the picture is a bunch of black paint.

 

I would POR 15 it, then seam seal it on all the corners and maybe a little over the welds (brushable sealer) and then some dynamat and carpet and you good to go!