Hot Rods Banger Powered Cars - Post your pics here

Nice "Ardun"!! How's it perform? An H&H conversion?

 

Heres my Son's Grahams 31 A Roadster. Just completed and running in.

 

It runs great. 4" bore 4 5/8" stroke 232 c.i. breaks crank shafts. I've busted 2 now.

 

Can I ask what the cause is to the broken crankshafts?

 

I would ***ume very "inspired" driving!

 

I think we have an official H.A.M.B. Banger Club.....
...... I can feel a T Shirt brewing!!!!!

 

Hey, That sounds like a plan I can get shirts done.

If anyone has some ideas for the design, post them here or send them to me.

 

4" bore & 4 5/8" stroke. Counter weighted B crank offset ground 3/16". 3/8" stroke seems to be too much for reliability on the street.

I can't say that hard driving has had that much to do with it. First one broke in less then 200 miles. This last one went @ 1500 miles.

I wish I had a stocker short block as a spare to use in the car untill I get the stroker worked out.

 

Heavy foot! ( just Kidding )

 

Don't mean to insult your intelligence but I suspect reducing the journal diameter on a 70+ year old crank might be the problem. If you want to keep the stroke for the torque, you might be ahead in the long run seeing if **** or someone can grind you a billet crank. $$$ I know. Didn't Donovan offer a new crank?

 

No insult taken. Any advice from those with experience is cheaper then lessons learned the hard way. I said the same thing when discussing the build. I relyed on the engine builders experience that this would be fine. I guess I was a Guinea pig on this one.

I dont know if Donavan is making a 3 bearing crank. The one they make for their engine has 5 mains.


I will probably go a different direction when I get back into this one. Probably a 5 main set up.

As this is a picture thread, We should probably move this topic to next months Banger thread.

Sorry if this got the thread off on a tangent

 

fur bisuit,

Sad to see that one go- it was a great speedster! Do you have any pics of the ch***is during the build?

 

Old Crow has always been banger powered. Last year had a HAL single overhead cam head, but this year she's running a flathead. I'll post pics of the new motor soon.
Bangers forever !!!!!

 

MMMM! Yummy! Hamb Banger shirts!!!

Forget the mash & bangers just bring me the Hamb & bangers!

Keven

 

That's an awesome photo!

 

does it have to be a B or can it be an A probably can fix ya up either way
Ken

 

Thanks Ken.

PM'd you

Dan

P.S. OLD CROW RULES!!!!!!!!!!!!

 

You guys are giving me wood, I wanna pull the banger I have out back in an old frame. that Green Pickup is amazing! I happen to have all the parts here to build one myself, may have to plagarize when the time comes!

 

Hey Bobby,
I know you are busy but dont hold out on us too much longer with the pics of the new banger!?!
Greg

 

Weber carb,header,mallory dual point distributor,no muffler,daily driver.Not good in 112 degree weather with the front window open!

 

There are some awesome banger powered rides here!
Does anyone have any contact details for anyone in the For Ever Four club?

 

Ok here is mine again....

Got a new diamond block model B in with a pair of Strong 48's - Thomas manifold and cover plate.

Lightened flywheel

Police head

And a load more.

Er making a tow hitch.

 

The Odeon **** Cee-dan. Current weapon of choice whilst it still makes me smile! Stock-ish '30 Fordor, on 4" & 4.5" steels, ported Diamond B block, touring grind on the cam, reshaped stainless stock size valves, early Thomas head, and 3.54 gears in the rear. Cruises at a steady 60mph all day, 4-up with all the camping gear in, on, and around. I can ask no more - hell, I'm quite fond of the ol' slug.

 

Hey Iceman, nice pickup! My wife and I camp at Cinnamon Bay from time to time. What color is your pickup? I'm looking for a good color for my 32 B Woody.

 

Here is one of ours. A 27 T with T banger. Little over 50hp and a **** load of fun.
Speedsterinc

 

It's ace, dude....

 

Cool cars one and all, s'pose I should join in so here's my Sport Coupe (with Darren's Tub in the first picture).











And here's the engine before it got dirty!

 

I've been really enjoying the banger threads on the HAMB, but since I'm not sure what my plans are for my 32 B Woody, I really haven't felt like I could contribute. Well I think I came up with something. It's a rough start, but what do you guys think of this?