Register now to get rid of these ads!

My project 34 pro street

Discussion in 'The Hokey Ass Message Board' started by texascuda, Aug 12, 2008.

Thread Status:
Not open for further replies.
  1. texascuda
    Joined: Dec 10, 2007
    Posts: 22

    texascuda
    BANNED
    from Dallas, TX

    Well it's been a while on an update so here goes.

    Got the trunk lift in and working, finished the drive line, had the drive shaft cut & re-balanced, installed the new pinion disk brake parking system, mounted the parking brake. Order the trans lines got them installed, along with the fuel lines & filter. Anyhow allot more done.

    So on 08-10 no guts no glory added gas in the tank, turned it over a few time to get oil pressure, but had no gauges working, [​IMG] check fuse, install fuse works better with fuse in. Ok everything looks good add MSD power wire.....here goes. Fired right up ran nice. Now if I an get the brakes working it may be able to move under it own power..... [​IMG]

    Regards,

    STeve
     

    Attached Files:

  2. Lee Martin
    Joined: Jun 17, 2005
    Posts: 739

    Lee Martin
    Member

  3. texascuda
    Joined: Dec 10, 2007
    Posts: 22

    texascuda
    BANNED
    from Dallas, TX

    I got this as an unfinished car.

    Monitto body from 1991
    ZZZ crate motor
    Rossi 700r4
    Speedway Eng quick change
    TCI Pro street frame
    Mustang II front end
     

    Attached Files:


  4. Nice "Street Rod" allthough owner built... it's on the "Wrong Board"...!

    Unless you're building this to "flip" and fund for something more traditional... I'd "STOP" posting on this "Tupperware" kit car here..!!!
     
    Last edited: Aug 12, 2008
  5. texascuda
    Joined: Dec 10, 2007
    Posts: 22

    texascuda
    BANNED
    from Dallas, TX

    Bite me, I guess this is why I don;t post on the board see ya.............wont be back. If you have nothing nice to say keep it in your yap..........
     
  6. Hey... I said it was nice... just on the wrong board...!!! Hahaha...!

    Probably be fun to race...!
     
  7. don't let the door hit ya...

    you know, if you can't figure out, after being on the board for 9 months, that your pro-street fiberglass 34 isn't what this board is interested in, then you deserve a few good slaps.

    perhaps you never read any posts here?

    perhaps you did read some of the posts here, and thought, "AW, it don't matter if my car don't fit, they'll like it anyway 'cause I spent so much money on it!"
     
  8. Old-Soul
    Joined: Jun 16, 2007
    Posts: 3,788

    Old-Soul
    Member

    I get confused when someone comes onto a TRADITIONAL message board, posts a car that doesn't fit the criteria, and then they get upset when it isn't recieved well.

    Yeah, you built the car and it's cool for a streetrod...but thats not what we're into here, so don't get upset with us just because you don't 'get it'
     
  9. texascuda
    Joined: Dec 10, 2007
    Posts: 22

    texascuda
    BANNED
    from Dallas, TX

    I have less money in then than most of you ass wipes. I also like anyone who want to build a car an learn so if that not up your standard to bad.

    I do read this and get some good info but your's it good for nothing oh I can wipe my ass with your post
     
  10. There you go pal, prove your stupidity.

    let me be clear, since you're obviously STILL not getting it.

    YOUR CAR DOESN'T FIT HERE!

    That means, this is a TRADITIONAL message board for TRADITIONAL hot rods. There is not ONE thing on that fiberglass storage bin shaped like a 34 Ford that is TRADITIONAL.

    Perhaps you should find another board?

    Besides, I thought you were leaving?
     
  11. Wanna fight? Ha ha.
     
  12. 65deluxe
    Joined: Oct 16, 2007
    Posts: 756

    65deluxe
    Member


    ENGRISH?!

    Don't go away mad...just go away
     
  13. Lee Martin
    Joined: Jun 17, 2005
    Posts: 739

    Lee Martin
    Member

    "Ass wipes"???? I kind of felt sorry for you until you dropped that.

    With all the money you saved on your street rod, sign-up for some writing lessons....especially a refresher course in singular versus plural and linking verbs.

    -Lee
    Atomic Radio
    www.atomicpinup.com
     
  14. I think the guys are being overly harsh, while the car is outside the spirit of the site there is no need to be a bunch of jerks.
     
  15. 392_hemi
    Joined: Jun 16, 2004
    Posts: 1,737

    392_hemi
    Member

    You can use the money you saved for your NSRA and Goodguys memberships. You'll fit in well that crowd.
     
  16. ynottayblock
    Joined: Dec 23, 2005
    Posts: 1,954

    ynottayblock
    Member

    i thought you said you wont be back......
    in all seriousness dude, you should know your car wouldnt be well recieved here, so i dont know why you are getting your panties in a bunch. If you read the rules and watched the board you would have figured it out.
     
  17. 46mopar
    Joined: Sep 14, 2002
    Posts: 1,011

    46mopar
    Member

    Looks to be built So-What Style......A Clark?
     
  18. Django
    Joined: Nov 15, 2002
    Posts: 10,198

    Django
    Member
    from Chicago

    THAT is the funniest thing I've seen on the HAMB all year! Hahahaha! :D
     
  19. Evilfordcoupe™
    Joined: May 22, 2001
    Posts: 1,831

    Evilfordcoupe™
    Member

    I dont think I like the pro-street guys.



    -Jason
     
  20. 49ratfink
    Joined: Feb 8, 2004
    Posts: 20,095

    49ratfink
    Member
    from California

    how do you wipe your ass with an internet message board post?

    doesn't sound very sanitary to me.
     
  21. Ryan
    Joined: Jan 2, 1995
    Posts: 22,258

    Ryan
    ADMINISTRATOR
    Staff Member

    This is a traditional hot rod forum... thanks.
     
Thread Status:
Not open for further replies.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.