60 ranchero floor

Could anyone tell me where I can find the rear floor sections for a 60 Ranchero. I need the panels that would be under the rear seat in a car. Would Mustang panels be usable? Thanks

 

try the ones to a 4dr sedan, you'll have to trim to fit might be the closest thing available.

 

I ve already bought full replacment pans for both sides, but I need the rear sections also.

 

Mustang floor is completely different. Reproductions are not available. Any 60-65 Falcon or Comet can be a donor for the rear seat riser. I replaced mine last year. Cut through the rockers and the torque boxes from the donor car, then remove them from the thinner seat riser metal after it's out of the donor. If you try to separate the riser from the rocker and torque box inside the car it's easy to tear it up. better to work on it outside.

 

Ranchero was built on the station wagon platform. If you look in the bed you'll see a removable panel at the front of the bed, below the rear window. The wagon footwells are still under there. Makes a great toolbox or battery box area by putting piano hinge and Dzus fastners on the panel. El Camino's were built the same way

 

try Russ Wall at Wall to Wall Falcon Parts
626.969.8157