Register now to get rid of these ads!

Hello from the great white north

Discussion in 'New to the H.A.M.B.? Introduce yourself here!' started by Saxxon, Dec 14, 2008.

  1. Saxxon
    Joined: Dec 14, 2008
    Posts: 1,834

    Saxxon
    Member

    Not much else to do up here when it's -44 with the wind chill and the snow is pounding down other than read threads from other car nuts. I've been lurking here for some time and finally decided to take the plunge and join in.

    My current project is a straight axle 64 half cab Scout. It's an old school street racer from back in the early 70's. Back then a local legend named Jim Pratt pulled all the 4x4 stuff out , put in an econoline 5 inch drop axle , Olds rear with 5:13 gears and dropped in a 426 hemi set back 8 inches into the firewall. The truck ran 12's with little or no traction and was featured in the 1974 Hot Rod yearbook under the name Elephant Hunter. Ironically, this was the first Hot Rod magazine I ever owned. The Truck made a great first impression.

    After 20 years of this beast kicking around and languishing beside a number of garages, I came across it. The Hemi is long gone but the rest of it is in great shape. I'm upgrading it with a new Dana 60 and comp engineering ladder bars. I can't afford a new 426 so I'm going with the Hilborn injected SBC on Methanol I have from my last project. Should be a fun ride when done.

    But I digress, this should be posted somewhere on the board.
    Thanks for putting up with my rant

    Glad to be part of this board
     
  2. Midwest Rodder
    Joined: Dec 7, 2008
    Posts: 1,768

    Midwest Rodder
    Member

    Sounds like it is gonna be a wild ride! Welcome.
     
  3. Hey Saxxon welcome to the HAMB show us pics of your ride, Hank in Pennsylvania
     
  4. fiat gasser
    Joined: Sep 5, 2008
    Posts: 1,608

    fiat gasser
    Member

    Welcome. I second that , lets see some pic's it really sounds great would love to see it.
     
  5. welcome abord fellow canuck!To bad about 426 missing.How about a new hemi or better yet a 1st gen one!
     
  6. screwball
    Joined: Mar 5, 2001
    Posts: 1,763

    screwball
    Member

    welcome from another easterner. get in hold on and shut up sounds like it will be a hell of a ride.
     
  7. JML55
    Joined: Dec 14, 2008
    Posts: 9

    JML55
    Member

    I'm also new to this board but welcome anyway. I'm just outside of Winnipeg and the wind is blowing so hard here the visibility is almost zero.
     
  8. Saxxon
    Joined: Dec 14, 2008
    Posts: 1,834

    Saxxon
    Member

    Pictures of the beast coming soon

    I have the original article from 1974 as well as the barn find pictures from when I "found" it. The build up is currently not visually appealing so I'll wait until I'm rolling it out of the garage. In the meantime the pictures will have to wait until I can highjack the scanner at work.

    Scanner hijacked...Here is the original article from the 74 Hot Rod Yearbook as well as the "Barn Find" pictures.
     

    Attached Files:

    Last edited: Dec 15, 2008
  9. Canuck
    Joined: Jan 4, 2002
    Posts: 1,104

    Canuck
    Member

    Glad to see that old beast being revived. Often wondered what happened to it. Last time I saw it was in a drive in parking lot on McPhillips.

    Welcome to the HAMB.

    Canuck
    East St Paul
     
  10. JEPPA
    Joined: Apr 27, 2007
    Posts: 574

    JEPPA
    Member

    It was a little warmer here today. Welcome.
     
  11. It's damn cold here, but the corner of Portage and Main is the coldest spot on the whole planet. Welcome. Going to be in Winterpeg next week to see my bro and family and hope it warms up a bit from now til then. Only -40 windchill here now:)
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.