Register now to get rid of these ads!

Need V.I.N. number help quick!

Discussion in 'The Hokey Ass Message Board' started by CleanRedYj, Jan 8, 2009.

  1. CleanRedYj
    Joined: Jan 1, 2009
    Posts: 33

    CleanRedYj
    Member

    Ok, I have a clear ***le for my car, but I cant find the vin number anywhere on the car to verify. I have my car listed on ebay and have several people asking if the vin and ***le match. I looked on the inside of the door jamb on the windshield post and there is not one there. Not even any holes visable to indicate there formaly being one. It is a 1940 chevrolet 2 door sedan. Help would be greatly appreciated!!!
     
  2. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    Hello, this is copied from some where else.. The serial number is located on a plate on the right side of the floor pan in front of the front seat..

    ..this should help..
     
  3. CleanRedYj
    Joined: Jan 1, 2009
    Posts: 33

    CleanRedYj
    Member

    Thank you! I will head to the shop and check first thing in the morning.
     
  4. plodge55aqua
    Joined: Jan 4, 2009
    Posts: 1,710

    plodge55aqua
    Member
    from Alberta

    Hope it all works out for ya..
     
  5. mj40's
    Joined: Dec 11, 2008
    Posts: 3,303

    mj40's
    Member

    The early to mid 30's Chevys put the tag on the p***enger floor area near the seal plate. My 38 Chevy had it on the p***enger side cowl area. Tag was attached with screws.
     
  6. old dirt tracker
    Joined: Sep 20, 2006
    Posts: 1,002

    old dirt tracker
    Member
    from phoenix

    check on the p*** cowl. no # on the frame. engine serial may have been used. its on a pad by the dist.
     
  7. CleanRedYj
    Joined: Jan 1, 2009
    Posts: 33

    CleanRedYj
    Member

    no luck finding anything on the car. I did however find the number on the engine block and it matches the cars ***le vin number. maybe this will be good enough to get it ***le in a different state.
     
  8. bobwop
    Joined: Jan 13, 2008
    Posts: 6,164

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    that would work for me, and I am a licensed dealer and we consign to collector car auctions...nothing more strict that that. In many states, Wisconsin included, the engine number was used as the VIN, even if a serial number was evident on a plate of somekind. Kinda ****ed if you needed to change engines, but that is the way it was...they changed in the early 50's around here and now go by the VIN on a tag. Anyway, you should be golden!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.