what do YOU want to see reproduced??? as in...

studebaker pans!!! and 58 lincoln headlights

 

whatever you say, my friend and I'll never buy a part from you.

 

New yorker domer dash. Damn they are really cool but I can't imagine what it would take to repop that.
Still, has to be, hands down, the best dash ever, bar none.

 

Sam F.

This has nothing to do with this post, but anyway... You tried to contact me earlier. For some reason, i can´t send you PM so check your aol e-mail.. I replied there..

 

'39 Ford transmissions, with stronger gears (wish I still had the ones I blew up)

LaSalle grilles

Hilborn port injectors (I know that they make hemi stuff, but would be neat if they recast them for early Cads, Olds, especially Arduns)

There's one in every car, you'll see

 

I really cannot believe no one has listed these as everytime they show up for sale they are snatched up at crazy prices-1949 & 1950 Chevrolet stainless rear fender rock shields-right and left.

Also, another part that almost never shows up but seems to be widely sought after-1949 & 1950 Chevrolet rear fender stainless crown trim strips right and left.

Build them and they will come!

 

4.56 gears for 49 Olds. rear.

 

'51 Ford grille parts (upper 3 pieces), headlight trim...

 

I got to Agree with 52Henryj..

Theres still so many out there, with so little to choose from for parts..

 

1956 Ford F100 roof panel...

 

I second that. Its cooler to look for it longer than see one on every other car. This mass reproduction crap is really killing what was cool about all this stuff. Hard to sell a 350-350 want it now cookie cutter world, on the concept though...

 

58-59 chevy apache fleetside bed short ,and long

 

Model A Tudor rear quarters and full rear center panel.

 

26/27 turtle decks, 55 Pontiac tailight lenses,

 

12 volt batteries that look vintage and dont cost like the exact reproduction batteries.

 

hen's teeth...ok maybe also 30-31 open commercial dash rails, so I could replace mine.

 

How about affordable 1941 STEEL BODY WILLYS COUPES!

 

I have a set of M&H Racemasters. They are 7" wide and 30.5" tall. They fit everything and are great if you have a little too much gear in the car. Also, some '60's looking low back fiberglass seats that look right. Something you dont have to take out a loan to buy.

 

any new flathead block that I could afford.

An more 57-60 f100 sheetmetal

 

Thought i posted this before. Maybe in a diffrent thread but Man A Fre manifolds!!! You couldn't sell enough of em.