Register now to get rid of these ads!

34 ShowDown Bound

Discussion in 'The Hokey Ass Message Board' started by DefianceB, Apr 25, 2009.

  1. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    I'm hoping to make it to the Show Down on the 16th and touring around in my 34. Got it back from the Chop Shop Friday and we are working hard to meet the deadlines so we can make the show. This car hasn't been on the road since 1972. I hope to crisen her at Latamore. Today we got a small block and a trans mocked up while my buddy Ricky builds the motor. My carbs have been on the shelf for a few years as all my parts have on the anticipation of bringing it all together. If the radiator man doesn't hold me up I should be there. My wife and Buster have given the approval.:D
     

    Attached Files:

  2. gnichols
    Joined: Mar 6, 2008
    Posts: 11,412

    gnichols
    Member
    from Tampa, FL

    16th? Of May? GOOD luck. Looks good. Gary
     
  3. lothiandon1940
    Joined: May 24, 2007
    Posts: 32,406

    lothiandon1940
    Member

    Great looking coupe. Good luck on making the deadline. Less than 3 wks. now! Remember, it won't quite be finished 'till it has some Latimore mud on it.:)
     
  4. 31whitey
    Joined: Jan 2, 2007
    Posts: 2,214

    31whitey
    Member

    go man go.

    glad you didnt sell...your going to end up with a great car.

    is this the start.[​IMG]
     
  5. junkyardgenius
    Joined: Dec 29, 2005
    Posts: 909

    junkyardgenius
    Member
    from Kernow

    Great looking rod.How much is it chopped? Good luck with meeting the deadline.
     
  6. metalhotrodgirl
    Joined: Sep 10, 2003
    Posts: 822

    metalhotrodgirl
    Member

    goodluck !!!!! ill be there to see it if ya make it
     
  7. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    My bro Ricky has the engine it will be built by Friday. Wiring is in, I mocked up the engine and trans I hope to have it running no later than Sunday. We will work out the bugs and driving next week if all goes well. I just clear coated the body just incase of rain. It stops and steers if it starts all systems are go and I'm Jalopy Bound!!! Pray to the HOT ROD GODS FOR THE BLESSING THAT IS NEEDED TO MAKE THE SHOW!!!!!!!!!
     
  8. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    We fired the 34 up Friday night we pulled an all nighter not sleeping at all. Ricky took a cat nat in the old barbers chair about 8am. I took a shower and a power nap about 6:45am and had to run a car show at my armory the next day. We fired up the small block about 3am in the morning in the middle of town. Ricky came back later that day to ****on things up. Hope to test drive it this week and work out the bugs. Money is tight I hope I have enough to make the show. I'm spending into my reserve and my wife has beach trip plans. The guy in the gl***es is my best friend and barber he was up till 3am and my uncle bob was there as well and our mascott "Buster" my Boston Terrier he likes hanging with the boys. I included a few pictures of my car show as well. I hope to make the ShowDown.
     

    Attached Files:

  9. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    I pulled it out today to clean it up and get some better shots of it. Of course this 34 will evolve overtime, I'm just doing what I can with what I got. I fell pretty lucky to own it. I'm the only guy in town building one that isn't fibergl*** and I'm not making it look like and Easter Egg.
     
  10. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    Tell me what you think
     

    Attached Files:

  11. curbspeed
    Joined: Feb 7, 2002
    Posts: 4,907

    curbspeed
    Member

    Looks really good. What is your rear tire size. 750x16? Also, Can I get a close up shot of your door hinges. I like that look.
     
  12. Hank37
    Joined: Mar 28, 2007
    Posts: 2,121

    Hank37
    Member

    See ya there, have a safe trip.
     
  13. LOWDUG37
    Joined: Jan 31, 2007
    Posts: 1,008

    LOWDUG37
    Member

    Looks great,can't wait to see it in person.
     
  14. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    Rear tires are 850X15 I wasn't sure about the hinges. Warren came up with the idea but they grew on me, the doors where a little weak and the gussetts strengthened them up. I'm having some trouble with the carbs I think I have to much fuel pressure because fuel is dumping out everywhere. I'm ordering a pressure regulator this week to eleviate the problem. Working out the bugs buts it's coming together pretty fast.
     
  15. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    Here is what I started with about four years ago
     

    Attached Files:

  16. ss34coupe
    Joined: May 13, 2007
    Posts: 4,266

    ss34coupe
    Member

    you have done a tremendous job bringing this 34 coupe back to life! That is what hotrodding is all about.
     
  17. Crease
    Joined: May 7, 2002
    Posts: 2,878

    Crease
    Member

    She's comin together nicely!
     
  18. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    Put out logo on the door today and took a few pictures of me and my buddies.
     

    Attached Files:

  19. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    We got the lights working today
     

    Attached Files:

  20. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    The 34 HILL JACK HOT ROD pulled on it's own power today for the first time in 40 yrs or more. I pulled it off the trailer into the exhaust shop, it has already got alot of attention around town because, most people haven't seen anything like it around here. The guy at the exhaust shop just stood there looking at it trying figure heads or tails of the whole thing. I know they liked it I got alot of thumbs up.:D
     

    Attached Files:

  21. HotRod33
    Joined: Oct 5, 2008
    Posts: 2,570

    HotRod33
    Member

    You are going to have a great looking hotrod... Double check that everything is tight and that you have good brakes and steering and get that thing to the show... It is cool when you work hard and finally are able to drive YOUR hotrod.....
     
  22. thunderbirdesq
    Joined: Feb 15, 2006
    Posts: 7,091

    thunderbirdesq
    Member

    Looks great man, excellent job bringing her back. Keep it up, I wanna see it at the showdown! We going through the same showdown thrash with this T...

    [​IMG]
    <embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i56.photobucket.com/player.swf?file=http://vid56.photobucket.com/albums/g184/thunderbirdesq/VID00072.flv">

    See you there! (?):D
     
  23. travj31
    Joined: May 19, 2008
    Posts: 1,520

    travj31
    Member
    from Western PA

    cool ride...hope to see it in person next weekend!
     
  24. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    We will be there
     
  25. DefianceB
    Joined: Apr 30, 2006
    Posts: 105

    DefianceB
    Member

    MISSION ACCOMPLISHED!!!!! We made it to the show Friday morning about 3am and started the party at the Showdown. The guys pulled out the moonshine, guitars and the banjo and cominst the ceremony: we didn't stop untill I p***ed out the next night around 10pm. She made it around the track 4 times without a hitch. Got a little Latimore mud on her with a big smile on my face. Even got an award from Spike the photographer of the show as his personal pick. (Thanks Spike!) I got a little carried away and took it through the creek and pissed Scary Larry off but, you will have that when your having to much fun. I apoligized and moved on throughout the evening. Hope I seen you there I met some great people. See you next year!!!!
     

    Attached Files:

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.