Trailing Arm Sleeve source

Hi All,

I am looking for a source for custon length threaded sleeves for trailing arms, camber adjustman struts and toe adjustment stuts. I am building a 5 link rear suspension for a corvette IRS. I have the heim ends so I just need the sleeves.

Many Thanks,

Ken
Albuquerque

 

Just about any Off Road Fabrication shop can handle this for you. They make tie rods etc all the time out of heavy wall chrom moly.

 

Thanks - Will look call around here in Albuquerque.

Ken

 

Depending on the size (diameter) you can easily get threaded sleeves from the roundy round places like Stock Car Products ( http://stockcarproducts.com/susp9b.htm ) or AFCO ( http://www.afabcorp.com/AFCO_Dynate...CTGY&Store_Code=A&Category_Code=ct_ends-tubes ) in any length you need, both steel and aluminum.

I believe Coleman has a nice collection as well.

The roundy round suppliers have lotsa stuff that can be used in hot rodding applications IMHO.

Hope this helps.

Al in CT

 

www.ballisticfabrication.com