Register now to get rid of these ads!

Chopping my 1929 Whippet.

Discussion in 'The Hokey Ass Message Board' started by The Rabid Whippet, Aug 20, 2007.

  1. OK what do you think. Factory windshield is already only 9" high. How small is legal and what would be the biggest problem doing this. I guess I should measure chops that I like and go from there but if 8" is what rocks me, man 1" chop doesnt seem worth it.
     
  2. Unkl Ian
    Joined: Mar 29, 2001
    Posts: 13,509

    Unkl Ian

    Take a picture,print,then cut and rearrange until you like it.
    Or play with it in Photoshop,Illustrator,Paintshop Pro,MS Paint,etc.
     
  3. Richard Head
    Joined: Feb 19, 2005
    Posts: 547

    Richard Head
    Member

    With the engine and firewall installed and the body channeled, install the seat in the lowest comfortable position. Sit in it and see how much room there is above your head allowing room for a headliner, afro, tophat, etc. Then you'll know how much it should be chopped.
    I personally feel more comforable if I can stick my head through the side window opening. I like to think I could climb out "Duke boy style" if I had to.

    Dave
     
  4. Friend did a 4" chop on 33 pick up and then couldn't see overhead traffic signals.
     
  5. At 9" with the visor I doubt I could see one as it is. Im going to post a new topic. Show your chops. And see what looks good on what.
     
  6. publicenemy1925
    Joined: Feb 4, 2007
    Posts: 3,187

    publicenemy1925
    Member
    from OKC, OK

    Whippet, Whippet Good! I had to do it.
     
  7. Dont be doggin my car!!!:rolleyes: Actually with a Hemi, its going to become my sign in name. Or Ill just paint a Bull Mastiff on the side and call it a Whippet on steroids. LOL!
     
  8. Royalshifter
    Joined: May 29, 2005
    Posts: 16,117

    Royalshifter
    Moderator
    from California

    da da da da da da........da da........da da da da da da.........da da! Stand a dollar bill in the middle of the windshield gl*** and that will give you a good idea on height.
     
  9. I have heard of Kalifornia cops yaers ago actually accepting that as the law and writing tickets as such...
     
  10. JonDodge
    Joined: Apr 10, 2008
    Posts: 34

    JonDodge
    Member

    Hello i have a 29 whippet and would like to put a metal top on it can anyone tell me what doner roof i should use TKs.
     

  11. Somebody needs to photoshop DEVO into Rabid's avatar:D!!!

    Honestly, the car looks great as is, but a subtle (even just an inch) chop might work...

    Take some straight on pics from front, side, and back so that someone can play with it in photoshop.
     
  12. Oh,

    Here's a pic for you, too!

    [​IMG]
     
  13. Mopar34
    Joined: Aug 8, 2006
    Posts: 1,029

    Mopar34
    Member

    I can't speak for State of Washington, but here in PA the windshield has to be a minimum of 8" in height, anything shorter is illegal and you won't p*** inspection. No inspection no registration.

    My 34 has a 8" windshield (4" chop) and traffic lights are out to the question unless you have a light finder or like driving with your head on the window sill.:eek::D
     
  14. Kssssht. Send front and side profile pictures with measurements, over. Kssssht.
     
  15. sammamishsam
    Joined: Feb 7, 2008
    Posts: 1,590

    sammamishsam
    Member

    Whippet The State says 6" vertical unobstructed height minimum (WAC 204-10-024(2)) I've heard that the WSP interprets that the "unobstructed" view needs to be horizontally over the top of hood scoops etc.
     
  16. moses
    Joined: Dec 7, 2004
    Posts: 1,101

    moses
    Member

    this thread is a couple years old !!! but oh well.. jeffrey
     

  17. OOPS... sorry
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.