'32 Ford frame help

Fellow HAMBer's, can any of you provide me with mounting hole location measurements for any factory holes on the sides of a '32 frame? In particular the fender mounting holes and those for the steering box. Contacted American Stamping and now they want more money for a piece of paper with that info !!?? Something that should be provided when you purchase a set of rails IMHO. Thanks for any help. - Torch

 

For looks or to actually mount fenders?

 

How about this ?

Later, Mark

 

Mark, I've seen that one from Wescott, but those dimentions are for the body and firewall mounting holes on top of the rails. Thanks for trying to help though.

 

What do you have up your sleeve now Dave? You don't need those stinkin' holes. Leave them alone and build a hiboy damnit. Or are trying to make it look like an original frame? PM with the scoop.

 

Yep you're on to me Dale, buildin' a Hi-boy, and trying to make the frame as authentic as I can.

 

There was a post about a week ago with the those dimensions. Someone here has them. Maybe put it in your ***le. good luck. There are original frames in the area though. I might be able to do a tracing in the next coupe days.

 

Ya, Doug or Bruce or I bet even Steve Glucoft would do it for you if you asked real nice. I would do it but all my stuff is butchered beyond recognigtion.

 

It would be a good thing to include in the TECH archives here on the Hamb. Who has it?

 

Doug - you are right! this info should be in the tech archive.

ts3x65mph - BINGO! these are the ones.

Hopefully one of us will be able to come up with location measurements, thanks for the help so far Boys!

 

The SpeedWay catoloug used to have a picture with dimensions

 

There is a post on here somewhere that has that info, I think Limey steve posted it... I used it to drill my steering box hole in my original frame after that area was patched. I'll see if I can find it...

Edit: here's the front half of the frame, maybe you could pm steve for the rest?

http://www.jalopyjournal.com/forum/showthread.php?t=316753&highlight=32+steering

 

O Dave , I have 2 original 32 frames you can take measurments from ......

 

'32 Ford side:

 

Thank you sir!