DIY Old School Rodding

Project SAM....driveshaft and more.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Bom0iqjLcn0&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Bom0iqjLcn0&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

SAM DRIVELINE WORK & WELDING

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/SLKcrC_VqSw&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/SLKcrC_VqSw&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


SAM...bondo/body filler

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/wtvn94GrEHI&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/wtvn94GrEHI&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

SAM...engine work

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/1SOa3a1sRRs&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/1SOa3a1sRRs&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

blah ,blah,blah ,,love the narration and the soundtrack,,,very cool and fun

 

why are the traction bars on backwords?

 

because it's a DIY.

 

so because it's a DIY they put parts on backwords???
I don't get it....
I do plenty of DIY stuff,and don't put on something like that on backwords.

 

.......

 

stacy david otta look into these two ( gr***roots bigtime) to follow gearz, they come across pretty cool. maybe a mental-case in scratch ankle would do it that way.

 

Bethel Brother Rebuilding Brake Pistons



<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/uem5kRQ2vlw&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/uem5kRQ2vlw&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

The guy on the video is a wacko
do NOT cut your driveshaft in the middle.
He says he paid $40 for the rubber to rebuild his wheel cylinder.
For approximately the same price Advance Auto Parts will sell a complete brand new cylinder
Putting a bolt thru the window regulator handle will probably not hold it tight enough to be useful

 

Thanks for posting... I need a good laugh and got it when they showed the driveshaft cut in 2 pieces!!!!!

Sad part is you know somebody is going by these guys to build their car!!!!

Oh well, blah,blah,blah.....

 

Humor is a good thing... especially when it's not supposed to be funny.

 

Man I think they are drunk.

 

break pistons? Is that the objective or was spelling not covered in the 20 years these fellas must have been in GRAMMAR school?

 

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/_N4ff3EUjHw&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/_N4ff3EUjHw&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

It's painful....please stop!

 

That is NOT the way to make a drive shaft. I usually take a pipe cutter to the tube close to the yoke bung, then throw it in the ladth and turn the weld down enough to remove the rest of the tube. Do this on both ends, BUY a new tube, cut it to fit your mesurements, weld her up, then I bring it the local spring shop to get it balaced. All the while making sure that the darn thing is phased before final ***embly.

 

lol are you ****ing retarded?? obviously being sarcasic

 

x 2

 

HAHAHA! Damn.

 

stop calling everyone "bay-bay" you ****ing dolt.

jesus. i know it's suppose to be funny because it's not suppose to be funny and all-but all i feel is angry...

 

Those guys are a bunch of retarded hacks. Put on a ****ing shirt and lose the pony tail!

Them shortening the driveshaft is scary.

 

Well, my driveshaft woes are solved now.